Design of High Speed and Low Power 4t Sram Cell
نویسندگان
چکیده
Portable devices demand for low power dissipation. To reduce power dissipation, the subsystem in a device needs to be designed to operate at low power and also consume low power. Significant progress has been made in low power design of dynamic RAM’s. Static RAM’s are also critical in most VLSI based system on chip applications. Basic SRAM bit cell consists of 6T. Few designs using 4T are also available in open literature. In this paper a highly reliable, low power and high speed SRAM design is proposed and comparisons were made with 6T and basic 4T SRAM designs.
منابع مشابه
A RRAM Integrated 4T SRAM with Self-Inhibit Resistive Switching Load by Pure CMOS Logic Process
This paper reports a novel full logic compatible 4T2R non-volatile static random access memory (nv-SRAM) featuring its self-inhibit data storing mechanism for in low-power/high-speed SRAM application. With compact cell area and full logic compatibility, this new nv-SRAM incorporates two STI-ReRAMs embedded inside the 4T SRAM. Data can be read/write through a cross-couple volatile structure for ...
متن کاملA Sub-threshold 9T SRAM Cell with High Write and Read ability with Bit Interleaving Capability
This paper proposes a new sub-threshold low power 9T static random-access memory (SRAM) cell compatible with bit interleaving structure in which the effective sizing adjustment of access transistors in write mode is provided by isolating writing and reading paths. In the proposed cell, we consider a weak inverter to make better write mode operation. Moreover applying boosted word line feature ...
متن کامل4T-Decay Sensors
We present a novel temperature/leakage sensor, developed for high-speed, low-power, monitoring of processors and complex VLSI chips. The innovative idea is the use of 4T SRAM cells to measure on-chip temperature and leakage.Using the dependence of leakage currents to temperature, we measure varying decay (discharge) times of the 4T cell at different temperatures. Thus, decaying 4T sensors provi...
متن کاملLow- Power Analysis of Various 1-bit Sram Cells Using Spice
The need for low-power memory design is becoming a major issue in high-performance digital systems such as microprocessors, Digital Signal Processors (DSPs) and other applications. This paper discusses 7T, 6T, 5T & 4T SRAM cells configurations for the same. Six transistor (6T) SRAM Cells are the main choice for today’s cache applications. The static noise margin (SNM) of 6T SRAM cell is highest...
متن کاملEnergy Efficient Novel Design of Static Random Access Memory Memory Cell in Quantum-dot Cellular Automata Approach
This paper introduces a peculiar approach of designing Static Random Access Memory (SRAM) memory cell in Quantum-dot Cellular Automata (QCA) technique. The proposed design consists of one 3-input MG, one 5-input MG in addition to a (2×1) Multiplexer block utilizing the loop-based approach. The simulation results reveals the excellence of the proposed design. The proposed SRAM cell achieves 16% ...
متن کامل