High temperature shear strength of T650-35 / HFPE-II-52 polyimide matrix unidirectional composite

نویسندگان

  • Peeyush Bhargava
  • Alan T. Zehnder
چکیده

The shear strength of a 4-ply unidirectional composite laminate consisting of carbon fibers (T650-35) and a polyimide matrix (HFPE-II-52) was measured over a temperature range of 25 to 315C. The tests were performed using a Iosipescu test sample, modified to provide a more uniform shear stress distribution across the gauge section and loaded with an Arcan type test fixture. The test specimen design is based on the results of an extensive finite element study. Shear strength tests were performed on dry, 50% RH and 100% RH moisture saturated samples. Results of the experiment show that shear strength decreases from approximately 120 MPa at 25C to 60 MPa at 315C and that moisture saturated samples have a 5-10 MPa lower shear strength than dry samples.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Tension-Tension Fatigue Behavior of Unidirectional C/Sic Ceramic-Matrix Composite at Room Temperature and 800 °C in Air Atmosphere

The tension-tension fatigue behavior of unidirectional C/SiC ceramic-matrix composite at room temperature and 800 °C under air has been investigated. The fatigue hysteresis modulus and fatigue hysteresis loss energy corresponding to different number of applied cycles have been analyzed. The fatigue hysteresis loops models for different interface slip cases have been derived based on the fatigue...

متن کامل

THESIS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY Characterization of nano-scale materials for interconnect and thermal dissipation application in electronics packaging

This thesis focuses on studies of nano-scale materials in electronic packaging applications with respect to following aspects: surface analysis of nano-scale oxide of lead-free solder particles, and thermal performance and mechanical property studies of nano-scale fiber and metal composite-based thermal interface materials. The composition and thickness of the solder oxide have a direct impact ...

متن کامل

Modeling the Non-linear Viscoelastic Response of High Temperature Polyimides

A constitutive model is developed to predict the viscoelastic response of polyimide resins that are used in high temperature applications. This model is based on a thermodynamic framework that uses the notion that the ‘natural configuration’ of a body evolves as the body undergoes a process and the evolution is determined by maximizing the rate of entropy production in general and the rate of d...

متن کامل

Influence of Temperature and Moisture on the Compressive Strength of Carbon Fiber Reinforced Polymers

The effect of moisture absorption and high temperature on the compressive strength of unidirectional IM7/977-2 carbon/epoxy resins have been investigated experimentally. The specimens were divided into 4 groups, and tested under 4 different conditions by varying the testing temperature and moisture parameters. The fiber orientation selected were 0o, ±45o and 90o...

متن کامل

Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix

0266-3538/$ see front matter 2009 Elsevier Ltd. A doi:10.1016/j.compscitech.2008.12.021 * Corresponding author. Tel.: +1 979 845 9409; fax E-mail address: [email protected] (D.C The interfacial shear strength of carbon nanotube coated carbon fibers in epoxy was studied using the single-fiber composite fragmentation test. The carbon fibers were coated with carbon nanotubes (CNT) on the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006