Droplet Breakup in Expansion-contraction Microchannels
نویسندگان
چکیده
We investigate the influences of expansion-contraction microchannels on droplet breakup in capillary microfluidic devices. With variations in channel dimension, local shear stresses at the injection nozzle and focusing orifice vary, significantly impacting flow behavior including droplet breakup locations and breakup modes. We observe transition of droplet breakup location from focusing orifice to injection nozzle, and three distinct types of recently-reported tip-multi-breaking modes. By balancing local shear stresses and interfacial tension effects, we determine the critical condition for breakup location transition, and characterize the tip-multi-breaking mode quantitatively. In addition, we identify the mechanism responsible for the periodic oscillation of inner fluid tip in tip-multi-breaking mode. Our results offer fundamental understanding of two-phase flow behaviors in expansion-contraction microstructures, and would benefit droplet generation, manipulation and design of microfluidic devices.
منابع مشابه
Lattice Boltzmann Simulation of Deformation and Breakup of a Droplet under Gravity Force Using Interparticle Potential Model
Abstract In this paper interparticle potential model of the lattice Boltzmann method (LBM) is used to simulate deformation and breakup of a falling droplet under gravity force. First this model is applied to ensure that the surface tension effect is properly implemented in this model. Two tests have been considered. First, it has been checked an initial square drop in a 2D domain can freely def...
متن کاملReduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam
متن کامل
Droplet Formation by Confined Liquid Threads inside Microchannels
A confined liquid thread can form monodisperse droplets near the exit of a microchannel, provided the continuous phase is able to enter the microchannel. A general model that accurately predicts the droplet size including the breakup position inside the microchannel is presented and is verified with experimental observations; breakup occurs as long as the capillary number (Ca) of the liquid thr...
متن کاملCoexistence of different droplet generating instabilities: new breakup regimes of a liquid filament.
The coexistence of multiple droplet breakup instabilities in a Step-emulsification geometry is studied. A liquid filament, which is confined in one dimension by channel walls and surrounded by a co-flowing immiscible continuous phase, decays into droplets when subject to a sudden release of confinement. Depending on the filament aspect ratio and liquid flow rates, an unexpectedly rich variety o...
متن کامل