Bell shaped impedance control to minimize jerk while capturing delicate moving objects

نویسندگان

  • Arjun Nagendran
  • Robert C. Richardson
  • William J. Crowther
چکیده

Catching requires the ability to predict the position and intercept a moving object at relatively high speeds. Because catching is a contact task, it requires an understanding of the interaction between the forces applied and position of the object being captured. The application of force to a mass results in a change in acceleration. The rate of change of acceleration is called jerk. Jerk causes wear on the manipulator over time and can also damage the object being captured. This paper uses a curve that asymptotes to zero gradient at +/infinity to develop an impedance controller, to decelerate an object to a halt after it has been coupled with the end effector. It is found that this impedance control method minimizes the jerk that occurs during capture, and eliminates the jerk spikes that are existent when using spring dampers, springs or constant force to decelerate an object.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A simple control policy for achieving minimum jerk trajectories

Point-to-point fast hand movements, often referred to as ballistic movements, are a class of movements characterized by straight paths and bell-shaped velocity profiles. In this paper we propose a bang-bang optimal control policy that can achieve such movements. This optimal control policy is accomplished by minimizing the L∞ norm of the jerk profile of ballistic movements with known initial po...

متن کامل

Planning Arm with 5 Degrees of Freedom for Moving Objects Based on Geometric Coordinates and Color

Skilled mechanical arms of consanguine relationship formed by joints the relative motion of the adjacent interfaces enable, have been connected. Ability to perform a variety of pre-programmed robotic manipulator in various industries. Skilled mechanical arms in recent years as a significant progress has been completed. House repair and easier to work with them as well and fit and optimal relati...

متن کامل

Energy-related optimal control accounts for gravitational load: comparing shoulder, elbow, and wrist rotations.

We permanently deal with gravity force. Experimental evidences revealed that moving against gravity strongly differs from moving along the gravity vector. This directional asymmetry has been attributed to an optimal planning process that optimizes gravity force effects to minimize energy. Yet, only few studies have considered the case of vertical movements in the context of optimal control. Wha...

متن کامل

A Simple and Accurate onset Detection Method for a Measured Bell-shaped Speed Profile

Motor control neuroscientists measure limb trajectories and extract the onset of the movement for a variety of purposes. Such trajectories are often aligned relative to the onset of individual movement before the features of that movement are extracted and their properties are inspected. Onset detection is performed either manually or automatically, typically by selecting a velocity threshold. ...

متن کامل

A simple and accurate onset detection method for a measured bell - shaped speed profi

Motor control neuroscientists measure limb trajectories and extract the onset of the movement for a variety of purposes. Such trajectories are often aligned relative to the onset of individual movement before the features of that movement are extracted and their properties are inspected. Onset detection is performed either manually or automatically, typically by selecting a velocity threshold. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007