The design of peak constrained least squares FIR filters with low complexity finite precision coefficients
نویسندگان
چکیده
A method for the design of Peak Constrained Least Squares (PCLS) Finite duration Impulse Response (FIR) digital filters with low complexity Finite Precision Coefficients (FPC) based on Adams’ optimality criterion and an efficient local search is presented. Simple quantization of the infinite precision coefficients typically leads to filter designs which fail to meet the frequency response, Passband to Stopband energy Ratio (PSR), and coefficient complexity (number of coefficient adders and subtractors) specifications. It is shown that it is possible to design a filter with an acceptable PSR that meets the frequency response specification while using a specified number of adders and subtractors.
منابع مشابه
Design of optimum high-order finite-wordlength digital FIR filters with linear phase
A novel iterative quantization procedure for the design of finite wordlength linear phase FIR filters of high order and minimum frequency domain error is proposed: a one by one increased number of filter coefficients is quantized where the augmented frequency domain error is re-minimized in each case. This new approach achieves a smaller frequency domain error than rounding of the optimal non-q...
متن کاملDesign and Properties of Two-channel Fir Filter Banks Optimized by Using Peak-constrained Least Squares Optimization Criterion
This paper considers the design and properties of two-channel alias-free finite-impulse response (FIR) filter banks where the analysis filters are optimized by using the peak-constrained least squares (PCLS) optimization criterion. All the alias-free twochannel filter banks proposed in the literature are under consideration. For the proposed PCLS designs, the maximum of the stopband energies of...
متن کاملOn Power Reduction of FIR Digital Filters Using Constrained Least Squares Solution
In this report, we apply constraint least squares solution (CLS) to the problem of reducing the number of operations in FIR digital filters with a motivation of reducing its power consumption. The constraints are defined by the maximum allowable add/subtract operations in forming the products which are used in computing the output. We show that truncation and rounding 0.f coefficients can be vi...
متن کاملComputationally efficient weighted least-squares design of FIR filters satisfying prescribed magnitude and phase specifications
An efficient method for the design of FIR filters satisfying prescribed magnitude and phase specifications is described. The method involves formulating an objective function in a quadratic form. The filter coefficients are obtained by solving a system of linear equations which involves either a Toeplitz matrix or a Toeplitz-plus-Hankel matrix. The computational complexity associated with such ...
متن کاملA Methodology for Rapid Prototyping Peak-Constrained Least-Squares Bit-Serial Finite Impulse Response Filters in FPGAs
Area-efficient peak-constrained least-squares (PCLS) bit-serial finite impulse response (FIR) filter implementations can be rapidly prototyped in field programmable gate arrays (FPGA) with the methodology presented in this paper. Faster generation of the FPGA configuration bitstream is possible with a new application-specific mapping and placement method that uses JBits to avoid conventional ge...
متن کامل