Studies on argon collisions with smooth and rough tungsten surfaces.

نویسندگان

  • M S Ozhgibesov
  • T S Leu
  • C H Cheng
  • A V Utkin
چکیده

The aim of this work is to investigate argon scattering behaviors on the smooth and rough tungsten surfaces. Current work deals with numerical simulation of nanoscale heat transfer process accompanying with rarefied gas-solid substrate interactions using molecular dynamics (MD) method. Taking into account that this method is very time consuming, MD simulation using CUDA capable Graphic Cards is implemented. The results found that imperfection of the surface significantly influences on gas atom's momentum change upon collision. However, the energy exchange rate remains unchanged regardless to the surface roughness. This finding is in contrast with the results in extant literatures. We believed the results found in this paper are important for both numerical and theoretical analyses of rarefied gas flow in micro- and nano-systems where the choice of boundary conditions significantly influences flow.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Damage studies on irradiated tungsten by helium and argon ions in a plasma focus device

Damage of tungsten due to helium and argon ions of a PF device was studied. Tungsten samples were irradiated by 20 shots of the plasma focus device with argon and helium as working gases, separately. The tungsten surface was analyzed by SEM, before and after irradiation. SEM revealed dense blisters with diameters of a few hundred nanometers, on the samples which were irradiated by helium ions, ...

متن کامل

The Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films

In the present study, effect of interfacial roughness on the ion implanted Tantalum based surfaces has been investigated. The argon ions with energy of 30 keV and in doses of 1×1017 , 3×1017 , 5×1017 , 7×1017 , and 10×1017  (ion/cm2) have been used at ambient temperature. The Atomic Force Microscopy (AFM), analysis have been used to study and characterize the surfaces morphology. The effect of ...

متن کامل

بررسی میزان چسبندگی کاندیدا آلبیکنس به مواد مورد استفاده در ساخت بیس دنچرهای متحرک

Statement of Problem:The surface topography of denture base material is an important factor for the adhesion of Candida albicans and other microorganisms.Purpose: The aim of this study was to evaluate the adherence of Candida albicans to four types of denture base materials (Acropars acrylic resin, Meliodent acrylic resin, rough and smooth surfaces of Molloplast B).Materials and Methods: Seven ...

متن کامل

Single bacteriorhodopsin molecules revealed on both surfaces of freeze- dried and heavy metal-decorated purple membranes

The flat sheets of the purple membrane from Halobacterium halobium contain only a single protein (bacteriorhodopsin) arranged in a hexagonal lattice. After freeze-drying at -80 degrees C (a method that is superior to air-drying), shadowing with tantalum/tungsten, and image processing, structural details on both surfaces are portrayed in the range of 2 nm. One surface is rough and lattice lines ...

متن کامل

Effect of Moisture Content on Shear Strength of Offshore Clay Interface Steel Surface

This paper investigates the effect of moisture content on interface shear strength between offshore clay and steel plate. Although, sensitive and high plasticity offshore clay deposits are widely distributed in Malaysia and many other countries in the world, and steel is a vital construction material for many structures, research works on interaction between offshore clay and steel surface are ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of molecular graphics & modelling

دوره 45  شماره 

صفحات  -

تاریخ انتشار 2013