Hybrid nanocomposites with tunable alignment of the magnetic nanorod filler.

نویسندگان

  • Fabien Perineau
  • Céline Rosticher
  • Laurence Rozes
  • Corinne Chanéac
  • Clément Sanchez
  • Doru Constantin
  • Ivan Dozov
  • Patrick Davidson
  • Cyrille Rochas
چکیده

For many important applications, the performance of polymer-anisotropic particle nanocomposite materials strongly depends on the orientation of the nanoparticles. Using the very peculiar magnetic properties of goethite (α-FeOOH) nanorods, we produced goethite-poly(hydroxyethyl methacrylate) nanocomposites in which the alignment direction and the level of orientation of the nanorods could easily be tuned by simply adjusting the intensity of a magnetic field applied during polymerization. Because the particle volume fraction was kept low (1-5.5 vol %), we used the orientational order induced by the field in the isotropic phase rather than the spontaneous orientational order of the nematic phase. At the strongest field values (up to 1.5 T), the particles exhibit almost perfect antinematic alignment, as measured by optical birefringence and small-angle X-ray scattering. The results of these two techniques are in remarkably good agreement, validating the use of birefringence measurements for quantifying the degree of orientational order. We also demonstrate that the ordering induced by the field in the isotropic suspension is preserved in the final material after field removal. This work illustrates the interest, for such problems, of considering the field-induced alignment of anisotropic nanoparticles in the isotropic phase, an approach that is effective at low filler content, that avoids the need of controlling the nematic texture, and that allows tuning of the orientation level of the particles at will simply by adjusting the field intensity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Uniaxial deformation of nanorod filled polymer nanocomposites: a coarse-grained molecular dynamics simulation.

A coarse-grained molecular dynamics simulation was used to investigate the stress-strain behavior of nanorod-filled polymer composites. The effects of the interfacial interaction, aspect ratio of fillers, filler functionalization, chemical couplings between the polymer and the filler and the filler loading on the mechanical reinforcement were explored. The results indicate that there exists an ...

متن کامل

Molecular dynamics simulation of the conductivity mechanism of nanorod filled polymer nanocomposites.

We adopted molecular dynamics simulation to study the conductive property of nanorod-filled polymer nanocomposites by focusing on the effects of the interfacial interaction, aspect ratio of the fillers, external shear field, filler-filler interaction and temperature. The variation of the percolation threshold is anti N-type with increasing interfacial interaction. It decreases with an increase ...

متن کامل

Electroconductive Pet/swnt Films by Solution Casting

The market for electrically conductive polymers is rapidly growing, and an emerging pathway for attaining these materials is via polymer-carbon nanotube (CNT) nanocomposites, because of the superior properties of CNTs. Due to their excellent electrical properties and anisotropic magnetic susceptibility, we expect CNTs could be easily aligned to maximize their effectiveness in imparting electric...

متن کامل

Structure-magnetic property correlations in nickel-polymer nanocomposites

Epoxy matrix nanocomposites with nickel nanoparticles of two different sizes were processed and characterized to investigate their structure-magnetic property correlations. Crystal structure, morphology, density, resistivity and magnetic properties of the nanocomposites with different filler contentswere compared for different size scales. Nanocomposites with 25 nm nanoparticles showed higher c...

متن کامل

Photocatalytic and Magnetic Behavior of Fe2TiO5-5A Zeolite Nanocomposites

In this paper we report synthesis of Fe2TiO5-5A zeolite (Z5A) nanocomposites with 5%, 10% and 20% weight percent of Fe2TiO5 in 5A zeolite in stearic acid media after calcination of the gel samples obtained at 600-900°C for 2 hrs. The powder X-RAY diffraction (XRD) patterns have been used for characterization of the prepared samples. The Scanning Electron Microscopy (SEM) images and X-ray Energy...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • ACS applied materials & interfaces

دوره 6 3  شماره 

صفحات  -

تاریخ انتشار 2014