Inelastic Dynamic Analysis of Structures under Blast Loads Using Generalized B-spline Method
نویسندگان
چکیده
Quartic B-spline time integration method has been recently proposed for solving linear problems in structural dynamics. This paper developed this method to nonlinear dynamic analysis of single-degree-of-freedom (SDOF) systems under exploding loads. Using quartic B-spline basis function, this method gained second order of acceleration at each time-step. Thus it benefits from high accuracy compared to the methods in the literature. In this research, in order to applying the iterative process in the procedure, firstly, a series of standard formulas were derived from previous formulation. Then the Newton-Raphson iterative method used to develop new formulation for solving nonlinear dynamic problems. Finally, for the new scheme, a simple step-by-step algorithm is implemented and presented to calculate dynamic response of SDOF systems. The validity and effectiveness of the proposed method is demonstrated with two examples. The results were compared with those from the famous numerical method. The comparison shows that the proposed method is a fast and simple procedure with trivial computational effort.
منابع مشابه
Evaluation of Damage Distribution in Elements of Dual Frames
Researches show that the strength criterion is inadequate for design of structures against seismic loads. Since structures yield and experience plastic deformation under strong ground motion, considering structural damage with inelastic behavior may be a considerable criterion for design and control of the structures.In this paper, three steel structures with dual system consisting of intermedi...
متن کاملExperimental Study of Masonry Structure Under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating
Given the sophisticated nature of the blast phenomenon in relation to structures, it is of significance to accurately investigate the structure behavior under blast loads. Due to its rapid and transient nature, blast loading is one of the most important dynamic loadings on the structures. Since masonry materials are widely used as the partition and bearing walls in the existing and newly-built ...
متن کاملRetrofit of Blast Resistant Rc Members with Cfrp and Srp Summary
It can be learned that the equivalent viscous damping ratio is a crucial parameter in the application of the displacement based (DBD) method. Analytical studies presented here and elsewhere indicate that the equivalent viscous damping ratio is highly dependent on the axial load level. Furthermore, the same can apply for the loading type; namely, seismic and blast loads. Based on research findin...
متن کاملNonlinear inelastic static analysis of plane frames with numerically generated tangent stiffness matrices
For the nonlinear analysis of structures using the well known Newton-Raphson Method, the tangent stiffness matrices of the elements must be constructed in each iteration. Due to the high expense required to find the exact tangent stiffness matrices, researchers have developed novel innovations into the Newton-Raphson method to reduce the cost and time required by the analysis. In this paper, a ...
متن کاملStability Criteria for Rectangular Plates Subjected to Intermediate and End Inplane Loads Using Spline Finite Strip Method
This paper is concerned with elastic local buckling of rectangular plates subjected to intermediate and end inplane loads. Since closed form solution for buckling analysis of plates with different end conditions and subjected to intermediate loads is complicated, numerical methods are more useful. Because of restrictions on the two finite strip methods, the longitudinal B3 spline expressions co...
متن کامل