AHybrid RSS/TOAMethod for 3D Positioning in an Indoor Environment
نویسندگان
چکیده
This paper investigates 3D positioning in an indoor line of sight (LOS) and nonline of sight (NLOS) combined environment. It is a known fact that time-of-arrival-(TOA-) based positioning outperforms other techniques in LOS environments; however, multipath in an indoor environment, especially NLOS multipath, significantly decreases the accuracy of TOA positioning. On the other hand, received-signal-strength-(RSS-) based positioning is not affected so much by NLOS multipath as long as the propagation attenuation can be correctly estimated and the multipath effects have been compensated for. Based on this fact, a hybrid weighted least square (HWLS) RSS/TOA method is proposed for target positioning in an indoor LOS/NLOS environment. The identification of LOS/NLOS path is implemented by using Nakagami distribution. An experiment is conducted in the iRadio lab, in the ICT building at the University of Calgary, in order to (i) demonstrate the availability of Nakagami distribution for the identification of LOS and NLOS path, (ii) estimate the pass loss exponent for RSS technique, and (iii) verify our proposed scheme.
منابع مشابه
Indoor Positioning and Pre-processing of RSS Measurements
Rapid expansions of new location-based services signify the need for finding accurate localization techniques for indoor environments. Among different techniques, RSS-based schemes and in particular oneof its variants which is based on Graph-based Semi-Supervised Learning (G-SSL) are widely-used approaches The superiority of this scheme is that it has low setup/training cost and at the same ti...
متن کاملReceived Signal Strength Database Interpolation by Kriging for a Wi-Fi Indoor Positioning System
The main approach for a Wi-Fi indoor positioning system is based on the received signal strength (RSS) measurements, and the fingerprinting method is utilized to determine the user position by matching the RSS values with the pre-surveyed RSS database. To build a RSS fingerprint database is essential for an RSS based indoor positioning system, and building such a RSS fingerprint database requir...
متن کاملIMU-Aided Dual-Frequency RFID Based Localization in LOS/NLOS Hybrid Environment
The mitigation of NLOS (non-line-of-sight) propagation conditions is one of main challenges in wireless signals based indoor localization. When RFID localization technology is applied in applications, RSS fluctuates frequently due to the shade and multipath effect of RF signal, which could result in localization inaccuracy. In particularly, when tags carriers are walking in LOS (line-of-sight) ...
متن کاملDevelopment of an Indoor Location Based Service Test Bed and Geographic Information System with a Wireless Sensor Network
In order to provide the seamless navigation and positioning services for indoor environments, an indoor location based service (LBS) test bed is developed to integrate the indoor positioning system and the indoor three-dimensional (3D) geographic information system (GIS). A wireless sensor network (WSN) is used in the developed indoor positioning system. Considering the power consumption, in th...
متن کاملViFi: Virtual Fingerprinting WiFi-based Indoor Positioning via Multi-Wall Multi-Floor Propagation Model
Widespread adoption of indoor positioning systems based on WiFi fingerprinting is at present hindered by the large efforts required for measurements collection during the offline phase. Two approaches were recently proposed to address such issue: crowdsourcing and RSS radiomap prediction, based on either interpolation or propagation channel model fitting from a small set of measurements. RSS pr...
متن کامل