A Temperature-Insensitive Cladding-Etched Fiber Bragg Grating Using a Liquid Mixture with a Negative Thermo-Optic Coefficient
نویسندگان
چکیده
To compensate for the temperature dependency of a standard FBG, a cladding-etched FBG immersed with a liquid mixture having a negative thermo-optic coefficient is presented, and its characteristics are investigated. The Bragg wavelength of the cladding-etched FBG is shifted counter to the direction of the Bragg wavelength shift of a conventional FBG according to the mixing ratio of glycerin to water; thus, the temperature-dependent Bragg wavelength shift was almost compensated by using a liquid mixture of water (50%) and glycerin (50%) having the negative thermo-optic coefficient of -5 × 10(-4) °C(-1).
منابع مشابه
Quadratic behavior of fiber Bragg grating temperature coefficients.
We describe the characterization of the temperature and strain responses of fiber Bragg grating sensors by use of an interferometric interrogation technique to provide an absolute measurement of the grating wavelength. The fiber Bragg grating temperature response was found to be nonlinear over the temperature range -70 degrees C to 80 degrees C. The nonlinearity was observed to be a quadratic f...
متن کاملOptical-Based Sensors for Monitoring Corrosion of Reinforcement Rebar via an Etched Cladding Bragg Grating
In this paper, we present the development and testing of an optical-based sensor for monitoring the corrosion of reinforcement rebar. The testing was carried out using an 80% etched-cladding Fibre Bragg grating sensor to monitor the production of corrosion waste in a localized region of the rebar. Progression of corrosion can be sensed by observing the reflected wavelength shift of the FBG sens...
متن کاملAnalysis and Optimization of Thermodiffusion of an FBG Sensor in the Gas Nitriding Process
In this paper, we report the numerical calculations for a thermo-optical model and the temperature sensitivity of a fiber Bragg grating (FBG) sensor. The thermally-induced behaviors of a FBG sensor in the gas nitriding process were analyzed for temperatures ranging from 100–650 ◦C. The FBG consisted of properly chosen photosensitive fiber materials with an optimized thermo-optic coefficient. Th...
متن کاملChirped Fiber Bragg Grating (cfbg) by Etching Technique for Simultaneous Temperature and Refractive Index Sensing
This paper presents the fabrication of chirped Fiber Bragg Grating (CFBG) from uniform Fiber Bragg Grating (FBG) by etching technique in order to utilize it as refractive index sensors. Etching is carried out with the presence of a layer of silicone oil on top of the hydrofluoric acid to achieve partial-etching of the FBGs. The partiallyetched FBGs exhibit two different modes: fundamental mode ...
متن کاملSensitivity-Improved Strain Sensor over a Large Range of Temperatures Using an Etched and Regenerated Fiber Bragg Grating
A sensitivity-improved fiber-optic strain sensor using an etched and regenerated fiber Bragg grating (ER-FBG) suitable for a large range of temperature measurements has been proposed and experimentally demonstrated. The process of chemical etching (from 125 µm to 60 µm) provides regenerated gratings (at a temperature of 680 °C) with a stronger reflective intensity (from 43.7% to 69.8%), togethe...
متن کامل