Enhanced Photovoltaic Performance of Nanostructured Hybrid Solar Cell Using Highly Oriented TiO2 Nanotubes
نویسندگان
چکیده
Supan Yodyingyong,†,‡ Xiaoyuan Zhou,† Qifeng Zhang,† Darapond Triampo,§ Junting Xi,† Kwangsuk Park,† Benjie Limketkai, and Guozhong Cao*,† Department of Materials Science and Engineering, UniVersity of Washington, Seattle, Washington 98195, United States, Institute for InnoVatiVe Learning, Mahidol UniVersity, 999 Phuttamonthon 4 Road, Nakhon Pathom 73170, Thailand, Department of Chemistry, Center of Excellence for InnoVation in Chemistry, Faculty of Science, Mahidol UniVersity, Bangkok 10400, Thailand, and Intel Research Laboratories Seattle, Seattle, Washington 98105, United States
منابع مشابه
Comparison of Hybrid Blends for Solar Cell Application
In blended hybrid systems distinct microor nanostructured materials can be formed by phase separation. Network structures of particles or rods in a polymer matrix can be developed via self-assembly. We use this blending approach to compare active materials for application in solar cell devices. Blends were fabricated from either poly(hexylthiophene) P3HT or poly(triphenylamine) PTPA mixed with ...
متن کاملInfluence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells
A commercial Ti-Nanoxide was deposited on In-doped SnO2 (ITO) polymer substrates by tape casting technique with different thicknesses (7, 14 and 36μm) to be used as photoelectrode in flexible dye-sensitized solar cells (DSSCs). Ruthenium dye was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...
متن کاملDevelopment of lead iodide perovskite solar cells using three-dimensional titanium dioxide nanowire architectures.
Three-dimensional (3D) nanowire (NW) architectures are considered as superior electrode design for photovoltaic devices compared to NWs or nanoparticle systems in terms of improved large surface area and charge transport properties. In this paper, we report development of lead iodide perovskite solar cells based on a novel 3D TiO2 NW architectures. The 3D TiO2 nanostructure was synthesized via ...
متن کاملNanostructured metal oxide/conjugated polymer hybrid solar cells by low temperature solution processes
In this article, we have proposed a nanostructured photovoltaic device based on the ZnO nanostructures/poly(3-hexylthiophene)(P3HT):TiO2 nanorod hybrid by solution processes at low temperature. An array of ZnO nanorods with a larger size of y50 nm in diameter and y180 nm in length are grown to provide direct pathways for efficient charge collection. TiO2 nanorods with a size of y5 nm in diamete...
متن کاملPhotovoltaic Performance of Dye-Sensitized Solar Cell (DSSC) Fabricated by Silver Nanoclusters-Decorated TiO2 Electrode via Photochemical Reduction Technique
In this investigation, Ag@TiO2 nanocomposite was prepared by deposition of silver nanoclusters onto commercial TiO2 nanoparticles (known as P25 TiO2) via photodeposition technique as clean and simple photochemical route. The synthesized Ag@TiO2 nanocomposite was utilized in the fabrication of dye-sensitized solar cell (DSSC) chiefly because, compared ...
متن کامل