Unsaponifiable Matter in Carnuba (Cera carnuba) Wax, a Modification of the USP/NF and FCC Methods
نویسنده
چکیده
Carnuba wax consists chiefly of myricyl cerotate (MW 817.4) and small quantities of free cerotic acid (C26H52O2, Mw 396.7) and myricyl alcohol (C30H62O, mp 90 ̊C). Of the two common extraction solvents, ethyl ether or petroleum ether, Lewkowitsch prefers the former. Concerning separation of phases, he advocates addition of small amounts of alcohol or caustic, and he also states that formation of a flocculant layer between the aqueous layer and the solvent does not interfere with the correct estimation of the unsaponifiable matter. These statements were not corroborated in the hands of this chemist. The “Unsaponifiable Matter” in oils or and fats, which consist mainly of hydrocarbons, sterols and aliphatic alcohols of high molecular mass that are not saponifiable by alkali hydroxides but are soluble in the ordinary fat solvents, and to products of saponification that are soluble in such solvents. Carnuba wax, a rather expensive wax, may be adulterated with less expensive paraffin by dishonest merchants. ASTM has a method for determining paraffinic material in carnuba wax. It uses heptanes at its boiling point to dissolve the wax, apply it to a silica gel column, and elute only the nonpolar (i.e. alkane) material. The method has the disadvantage of using a large volume of haptane, nor is it called for by either US Pharmacopeia/National Formulary (USP/NF) or Food Chemicals Codex (FCC). The test for unsaponifiable matter on pure carnuba wax will yield a result of 50.0% 55.0%, while a higher result will betray the presence of paraffin adulterants.
منابع مشابه
Investigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
متن کاملLOPID (Gemfibrozil Tablets, USP)
DESCRIPTION LOPID (gemfibrozil tablets, USP) is a lipid regulating agent. It is available as tablets for oral administration. Each tablet contains 600 mg gemfibrozil. Each tablet also contains calcium stearate, NF; candelilla wax, FCC; microcrystalline cellulose, NF; hydroxypropyl cellulose, NF; hypromellose, USP; methylparaben, NF; Opaspray white; polyethylene glycol, NF; polysorbate 80, NF; p...
متن کامل61570-10 Lipitor (Master)
Lipitor tablets for oral administration contain 10, 20, 40 or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, USP; candelilla wax, FCC; croscarmellose sodium, NF; hydroxypropyl cellulose, NF; lactose monohydrate, NF; magnesium stearate, NF; microcrystalline cellulose, NF; Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide); polysorbat...
متن کاملImprovement of humidity resistance of magnesium powder using dry particle coating
Dry particle coating is used to enhance the moisture resistance of ground magnesium powder (primary size 75 Am) by coating its surface with carnuba wax (primary size 15 Am). Coating was done using magnetically assisted impact coating (MAIC), and two high-speed impaction-coating devices, the hybridizer and mechanofusion. The uncoated and coated samples are characterized by scanning electron micr...
متن کاملمطالعه پایداری ساختاری فازهای fcc-CHX در چارچوب نظریه تابعی چگالی
Recently, a new carbon modification, namly n-diamond, have been reported, whose structure is still a matter of debate. It is important to note that the synthesis of n-diamond was carried out in the presence of hydrogen or methan. In this work we evaluate the structural stability of five fcc-CHx phases by means of first-principle calculation. The total energy is obtained as a function of the is...
متن کامل