Quantification of Precipitation Hardening and Evolution of Precipitates
نویسندگان
چکیده
Quantification of precipitation hardening is a challenging subject as it demands combined knowledge of precipitation strengthening mechanism and precipitate growth/coarsening kinetics. Having not seen many attempts on developing new theories in recent years, the authors are aware of the fact that many existing concepts and developed theories are sometimes even neglected or misused. This article therefore aims to describe overview on some aspects which have not been fully addressed and/or misused. Recent developments in this subject include an accurate determination of the equilibrium precipitate fraction and interparticle spacing. The influence from precipitation fraction on precipitate coarsening and hardening kinetics was accounted for quantitatively, which allows the hardening quantification to be carried out in a more accurate manner. In addition, difficulties in quantification of precipitation strengthening effects in commercial systems are discussed. Advanced theories on dislocation precipitate interaction mechanisms are required to improve the accuracy in quantification of precipitation hardening to a high level.
منابع مشابه
Enhancing the low cycle fatigue strength of AA6061 aluminum alloy by using the optimized combination of ECAP and precipitation hardening
In the present study, mechanical properties and low cycle fatigue behavior of a solid-solutionized AA6061 aluminum alloy produced by equal channel angular pressing (ECAP) process were investigated. The grain refinement after two passes of ECAP significantly increased the yield stress and ultimate tensile stress and decreased the ductility of the alloy. However, the improvement of low cycle fati...
متن کاملModelling of Precipitation Hardening in Casting Aluminium Alloys
Precipitation hardening, because it involves the hardening of the material over a prolonged time, is also called age hardening, or ageing. By the appropriate heat treatment of precipitation hardening, the strength or hardness of some heat-treatable aluminium alloys can be enhanced by the formation of nano-meter sized second-phase precipitated particles within the original phase matrix. The fine...
متن کاملEffect of NbMo Addition on the Precipitation Behaviour of V Microalloyed Steel during Intercritical Annealing
This paper reports on the precipitation behaviour and microstructural evolution in ~20% cold rolled NbMoV and V single microalloyed low carbon steels during intercritical annealing. The microstructure and precipitation behaviour were studied by optical and scanning/transmission electron microscopy and microanalysis, X-ray diffraction technique and Vickers hardness testing. After intercritical a...
متن کاملThe Effect of Cu Additions on the Precipitation Kinetics in an Al-Mg-Si Alloy with Excess Si
The microstructural evolution during age hardening of a Cu-bearing Al-Mg-Si alloy has been investigated by the three-dimensional atom probe (3DAP) and transmission electron microscope (TEM) techniques, in order to clarify the effect of Cu on the initial age-hardening response. After 30 minutes of artificial aging at 175 8C, the alloy shows a significant increase in hardness. The TEM observation...
متن کاملStudy of the Enhanced Precipitation of an Aluminium 6061 Alloy Reinforced by SiC Particles in the Range of β\" Phase Temperature (RESEARCH NOTE)
An experimental method to follow the evolution of the precipitation phenomena in the metal-matrix composites using the thermoelectric power measurements is described. It is shown that one can follow the kinetics of the precipitation during aging. The influence of the reinforcement on the precipitation kinetics is studied in case of an aluminum 6061- SiC, composite (where SiC, represents SiC par...
متن کامل