Detection, Identification & Classification of Intra Pulse Modulated LPI Radar Signal using Digital Receiver
نویسنده
چکیده
The modern day Electronic Warfare(EW) receivers are required to match with the current day radar technologies like the Low Probability of Intercept(LPI) radars with various intra pulse modulations such as Chirp, Barker, Frank, Poly-phase and Poly time codes. This paper presents the state of the art single board Digital Receiver solution for intercepting and analyzing complex radar signals. Also the pre and post processing methodologies have been discussed from both the algorithmic as well as hardware point of view. Keywords— Digital Receiver, DSP, EW-Electronic Warfare, FPGA, Intra Pulse Modulation, LPI-Low Probability of Intercept, Time Frequency Algorithms.
منابع مشابه
Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملIdentification of LPI Radar Signal Modulation using Bi-coherence Analysis and Artificial Neural Networks Techniques
This paper presents Higher Order Spectral Analysis (HOSA) and Artificial Neural Network techniques for identification of LPI (Low Probability of Intercept) Radar signal. Common Spectral analysis and conventional methods fail to detect low powered emissions of LPI Radars and even normal radars in noisy environments. This leads us to use Higher Order Spectral Analysis (HOSA) techniques (bi-spectr...
متن کاملIntercept Receiver Signal Processing Techniques to Detect Low Probability of Intercept Radar Signals
Many users of radar today are specifying a Low Probability of Intercept (LPI) as an important tactical requirement. The term LPI is that property of a radar that because of its low power, wide bandwidth, frequency variability, or other design attributes, makes it difficult to be detected by means of passive intercept receiver devices such as electronic support (ES), radar warning receivers (RWR...
متن کاملDigital Receiver-based Electronic Intelligence System Configuration for the Detection and Identification of Intrapulse Modulated Radar Signals
An optimum electronic intelligence system configuration incorporating the state of the art technologies and achieving the highest parameter accuracies while processing the complex intrapulse modulated radar signals is presented in this paper. The system is based on the quad digital receiver, a state of the art single board solution for the detection and analysis of modern radar signals. The sys...
متن کاملSub-Nyquist sampling and detection in Costas coded pulse compression radars
Modern pulse compression radar involves digital signal processing of high bandwidth pulses modulated with different coding schemes. One of the limiting factors in the radar’s design to achieve desired target range and resolution is the need of high rate analog-to-digital (A/D) conversion fulfilling the Nyquist sampling criteria. The high sampling rates necessitate huge storage capacity, more po...
متن کامل