Grasping state estimation of printable soft gripper using electro-conductive yarn
نویسندگان
چکیده
Automatic handling of many types of food materials are required to realize the automation of production of commercially prepared box lunches. A printable soft gripper was developed for food handling which is simple to produce with a 3D printer. However, the sensing ability of the printable soft gripper was not discussed in previous research. In this paper, a novel method for estimating the grasping state of a printable soft gripper using electro-conductive yarn is presented. Electro-conductive yarn is a conductive material, and the resistance of strings is changed by stretching. It is less expensive than other sensors that can be used for measurement of grasping state. Additionally, it is easy to assemble and disassemble by hand. Electro-conductive yarn is applied to a prototype printable soft gripper, and the proposed estimation method is verified experimentally. From the experimental results, the estimated grasping state from the resistance of the electro-conductive yarn coincides with the actual grasping state of the gripper. Our proposed method of using electro-conductive yarn was successful for estimating the grasping state of a printable soft gripper.
منابع مشابه
Towards an objective evaluation of underactuated gripper designs
In this paper we explore state-of-the-art underactuated, compliant robot gripper designs through looking at their performance on a generic grasping task. Starting from a state of the art open gripper design, we propose design modifications, and importantly, evaluate all designs on a grasping experiment involving a selection of objects resulting in 3600 object-gripper interactions. Interested in...
متن کاملDEA for soft robotics: 1-gram actuator picks up a 60-gram egg
We introduce a soft actuator for grippers using DEA capable of bending actuation. The actuator is also able to generate the electro-adhesion by the fringe field formed at the edges of the electrodes. The adhesion improves the holding force and ensures the conformation of the structure to the object. After the characterization of the actuator, we develop a 2finger soft gripper capable of holding...
متن کاملDirectly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators
This paper presents a fully printable sensorized bending actuator that can be calibrated to provide reliable bending feedback and simple contact detection. A soft bending actuator following a pleated morphology, as well as a flexible resistive strain sensor, were directly 3D printed using easily accessible FDM printer hardware with a dualextrusion tool head. The flexible sensor was directly wel...
متن کاملThe Development of an IMU Integrated Clothes for Postural Monitoring Using Conductive Yarn and Interconnecting Technology
Spinal disease is a common yet important condition that occurs because of inappropriate posture. Prevention could be achieved by continuous posture monitoring, but most measurement systems cannot be used in daily life due to factors such as burdensome wires and large sensing modules. To improve upon these weaknesses, we developed comfortable "smart wear" for posture measurement using conductive...
متن کاملTouch Locating and Stretch Sensing Studies of Conductive Hydrogels with Applications to Soft Robots
Soft robots possess great potential in environmental adaptations, while their environmental sensing abilities are critical. Conductive hydrogels have been suggested to possess sensing abilities. However, their application in soft robots is lacking. In this work, we fabricated a soft and stretchable gel material, introduced its sensing mechanisms, and developed a measurement setup. Both experime...
متن کامل