Color Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
نویسندگان
چکیده
منابع مشابه
Color Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...
متن کاملComparative evaluation of the effect of Light Emitting Diode (LED) and Quartz Tungsten Halogen (QTH) light curing units on color stability of Filtek Z350 XT
Introduction:Discoloration of the resin-based composites is a common problem in restorative dentistry. There are many factors associated with the discoloration of dental materials in the oral environment. The purpose of this study was to evaluate the color changes in a nano-composite cured with a quartz-tungsten-halogen (QTH) and light emitting diode (LED) unit. Methods:80 disk-shaped specim...
متن کاملInfluence of Light-Curing Units on Color Stability of Composite Resins After Aging
Background and Aim: The use of composite restorations has increased in recent years. One of the most important problems with composite restorations is the loss of consistency between the composite and tooth color, which in most cases requires replacement. Materials and Methods: In this study, the color stability of 40 disc-shaped specimens (10 mm in diameter and 2 mm in height) from two types ...
متن کاملHardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...
متن کاملReaction of Rat Subcutaneous Connective Tissue to Resin Composites Polymerized with Different Light Curing Units and Different Lightening Methods
The aim of the study was to determine and compare the reaction of rat subcutaneous connective tissue to resin composites polymerized with different lights curing and lightening methods. In this in vivo study, 20 mature Wister Albino rats were used. The composite discs, 4 mm in diameter and 2 mm thick, were cured by QTH or LED light curing units with 4 different lightning methods (full power QTH...
متن کامل