Facile synthesis of porous MnO/C nanotubes as a high capacity anode material for lithium ion batteries.
نویسندگان
چکیده
Porous MnO/C nanotubes are synthesized by a facile hydrothermal method followed by thermal annealing, and possess excellent cyclability and high rate capability as an anode for lithium ion batteries.
منابع مشابه
MOF-derived ultrafine MnO nanocrystals embedded in a porous carbon matrix as high-performance anodes for lithium-ion batteries.
Although MnO has been demonstrated to be a promising anode material for lithium-ion batteries (LIBs) in terms of its high theoretical capacity (755 mA h g(-1)), comparatively low voltage hysteresis (<0.8 V), low cost, and environmental benignity, the application of MnO as a practical electrode material is still hindered by many obstacles, including poor cycling stability and huge volume expansi...
متن کاملHighly porous structure strategy to improve the SnO2 electrode performance for lithium-ion batteries.
SnO2 is a promising high-capacity anode material for lithium-ion batteries (LIBs), but it usually exhibits poor cycling stability due to its huge volume variation during the lithium uptake and release process. In this work, SnO2 nanofibers and nanotubes with highly porous (HPNFs, HPNTs) structure have been synthesized by a facile emulsion electrospinning and subsequent calcination process in ai...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملPreparation of a porous Sn@C nanocomposite as a high-performance anode material for lithium-ion batteries.
A porous Sn@C nanocomposite was prepared via a facile hydrothermal method combined with a simple post-calcination process, using stannous octoate as the Sn source and glucose as the C source. The as-prepared Sn@C nanocomposite exhibited excellent electrochemical behavior with a high reversible capacity, long cycle life and good rate capability when used as an anode material for lithium ion batt...
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 48 68 شماره
صفحات -
تاریخ انتشار 2012