Characterization and Comparison of Low Power Sram Cells
نویسندگان
چکیده
The comparison and analysis of SRAM cells provides vital information for trading of design parameters to meet stringent requirements in the deep sub micron ranges. Initially this paper introduces to SRAM cells, then cell parametric dependences are investigated and finally simulation results of the same are shown. An 11T SRAM cell is compared with the conventional 6T SRAM cell for SNM, Power, DRV and Bit Line capacitances variations. The impact of these parameters variations is investigated in detail and simulations results of the same is discussed.
منابع مشابه
A Sub-threshold 9T SRAM Cell with High Write and Read ability with Bit Interleaving Capability
This paper proposes a new sub-threshold low power 9T static random-access memory (SRAM) cell compatible with bit interleaving structure in which the effective sizing adjustment of access transistors in write mode is provided by isolating writing and reading paths. In the proposed cell, we consider a weak inverter to make better write mode operation. Moreover applying boosted word line feature ...
متن کاملEnergy Efficient Novel Design of Static Random Access Memory Memory Cell in Quantum-dot Cellular Automata Approach
This paper introduces a peculiar approach of designing Static Random Access Memory (SRAM) memory cell in Quantum-dot Cellular Automata (QCA) technique. The proposed design consists of one 3-input MG, one 5-input MG in addition to a (2×1) Multiplexer block utilizing the loop-based approach. The simulation results reveals the excellence of the proposed design. The proposed SRAM cell achieves 16% ...
متن کاملComparative Parametric Analysis for Stability of 6t and 8t Sram Cell
As the technology is improving , channel length of MOSFET is scaling down. In this environment stability of SRAM becomes the major concern for future technology. Static noise margin (SNM)[1] plays a vital role in stability of SRAM[2]. This paper gives an introduction to the “8T SRAM cell”[3]. It includes the Implementation, characterization and analysis of 8T SRAM cell and its comparison with t...
متن کاملLow Power 10T SRAM Design for Dynamic Power Reduction
The aim of paper is to get over the problem of 6T SRAM cell where it loses its reliability at low supplies due to degraded noise margins. These is done by using a 10T SRAM where the cell uses a charge sharing technique between the transistors so that SRAM could be made more rigid against the noises that can cause damage to the cell at low power supplies and along with that charge sharing betwee...
متن کامل6T SRAM at 45nm CMOS technology for low power optimization
SRAM is designed to provide an interface with CPU and to replace DRAMs in systems that require very low power consumption. Low power SRAM design is crucial since it takes a large fraction of total power and die area in high performance processors. A SRAM cell must meet the requirements for the operation in submicron/nano ranges. 8T SRAM is traditionally concerned as a more reliable memory cell,...
متن کامل