Structured light system calibration method with optimal fringe angle.
نویسندگان
چکیده
For structured light system calibration, one popular approach is to treat the projector as an inverse camera. This is usually performed by projecting horizontal and vertical sequences of patterns to establish one-to-one mapping between camera points and projector points. However, for a well-designed system, either horizontal or vertical fringe images are not sensitive to depth variation and thus yield inaccurate mapping. As a result, the calibration accuracy is jeopardized if a conventional calibration method is used. To address this limitation, this paper proposes a novel calibration method based on optimal fringe angle determination. Experiments demonstrate that our calibration approach can increase the measurement accuracy up to 38% compared to the conventional calibration method with a calibration volume of 300(H) mm×250(W) mm×500(D) mm.
منابع مشابه
Calibration of a micro-topographic measurement system based on Talbot fringe projection
A calibration method for micro-topographic measuring of a surface is described. Based on fringe projection using a stereo-microscope, an unmagnified Talbot self-image of a Ronchi ruling is imaged on the surface target through one of the microscope oculars. It is well-known that if a linear fringe pattern is projected on a surface object, the fringes are deformed according to its topography. The...
متن کاملDevelopment and Assessment of a Single-image Fringe Projection Method for Dyna,mic Applications
A single-image fringe projection profiling method suitable for dynamic applications was developed by combining an accurate camera calibration procedure and improved phase extraction procedures. The improved phase extraction process used a modified Hilbert transform with Laplacian pyramid algorithms to improve measurement accuracy. The camera calibration method used an accurate pinhole camera mo...
متن کاملOptimal checkerboard selection for structured light system calibration
Structured light system calibration has been widely studied over the decades, and a variety of calibration approaches have been proposed. Among these methods, the flexible method using flat checkerboard is widely adopted. However, there is a lack of studies on selecting the optimal checker size for high accuracy calibration, whilst it is vital to understanding this factor. This paper presents a...
متن کاملUltra-Precise Hybrid Lens Distortion Correction
A new hybrid method to realise high-precision distortion determination for optical ultra-precision 3D measurement systems based on stereo cameras using active light projection is introduced. It consists of two phases: the basic distortion determination and the refinement. The refinement phase of the procedure uses a plane surface and projected fringe patterns as calibration tools to determine s...
متن کاملRESUMEN DE TESIS DOCTORAL Neural Networks applied to 3D Object Depth Recovery
In this work the application of neural networks (NNs) in tridimensional object depth recovery and structured light projection system calibration tasks is presented. In a first approach, a NN using radial basis functions (RBFNN) is proposed to carry out fringe projection system calibration. In this case the RBFNN is modeled to fit the phase information (obtained from fringe images) to the real p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 53 33 شماره
صفحات -
تاریخ انتشار 2014