Experimental Production and Evaluation of Racetrack Coils for REBCO On-board Magnet
نویسندگان
چکیده
Work has been conducted to develop REBCO (Rare-Earth Barium Copper Oxide) magnets for Maglev. REBCO is one of several high temperature superconducting materials and has a high current density at high temperatures and in high magnetic field environments. The REBCO coated conductor will make it possible to raise the operating temperature of on-board magnets without increasing the coil weight. Since liquid helium is unnecessary for cooling REBCO coils, magnet operation is easier than that with low temperature superconducting magnets. The aim of this research is the development of a real-size REBCO coil and demonstration of its actual magnetomotive force on Maglev. This paper describes the conceptual design of the on-board REBCO magnet and the experimental production of racetrack pancake coils which constitute the real-size REBCO coil.
منابع مشابه
DESIGN MODIFICATIONS, FABRICATION AND TEST OF HFDB-03 RACETRACK MAGNET WOUND WITH PRE-REACTED Nb3Sn RUTHERFORD CABLE
A 10 T racetrack magnet (HFDB-03) wound with pre-reacted Nb3Sn Rutherford cable has been fabricated and tested at Fermilab. This magnet is the third one in a proof-ofprinciple series for the use of the React-and-Wind technology in common-coil dipole magnets for future accelerators. It consists of two flat racetrack coils (28 turns each) separated by 5 mm. The maximum field on the coil, at the s...
متن کاملAn 800 MHz all-REBCO Insert for the 1.3-GHz LTS/HTS NMR Magnet Program – A Progress Report
A critical component of the 1.3-GHz NMR Magnet (1.3G) program, currently ongoing at the Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center, MIT and now approaching its final stage, is the all high-temperature superconductor (HTS) 800-MHz insert (H800). The insert consists of three nested DP coils fabricated with 6-mm wide REBCO conductor. Coil 1, the innermost coil of H800 has a...
متن کاملElectromagnetic-Induced Quench of an Inner-Shim Coil for a REBCO High-Temperature Superconducting NMR Magnet
A RE(rare earth)Ba2Cu3Ox (REBCO) high-temperature superconducting (HTS) coil is a promising candidate to achieve a nuclear magnetic resonance (NMR) magnet operated at a magnetic field >23.5 Tesla (T), i.e. 1 H NMR frequency of 1 GHz. We developed and tested a 400 MHz (9.39 T) NMR magnet using an REBCO inner coil. The system included a low-temperature superconducting (LTS) shim coil inside the R...
متن کاملA Common Coil Design for High Field 2-in-1 Accelerator Magnets
A common coil design concept for 2-in-1 superconducting accelerator magnets is presented. It practically eliminates the major problems in the ends of high field magnets built with either high temperature superconductors (HTS) or conventional superconductors. Racetrack coils, consisting of rectangular blocks built with either superconducting tapes or cables, are common to both apertures with eac...
متن کاملRepeating Pulsed Magnet System for Axion-like Particle Searches and Vacuum Birefringence Experiments
We have developed a repeating pulsed magnet system which generates magnetic fields of about 10 T in a direction transverse to an incident beam over a length of 0.8 m with a repetition rate of 0.2 Hz. Its repetition rate is by two orders of magnitude higher than usual pulsed magnets. It is composed of four low resistance racetrack coils and a 30 kJ transportable capacitor bank as a power supply....
متن کامل