Stability of Dye Solar Cells with Photoelectrode on Metal Substrates
نویسندگان
چکیده
Rights: © 2010 The Electrochemical Society. This is the post print version of the following article: Miettunen, Kati & Ruan, Xiaoli & Saukkonen, Tapio & Halme, Janne & Toivola, Minna & Guangsheng, Huang & Lund, Peter. 2010. Stability of Dye Solar Cells with Photoelectrode on Metal Substrates. Journal of The Electrochemical Society. Volume 157, Issue 6. B814-B819. ISSN 0013-4651 (printed). DOI: 10.1149/1.3374645., which has been published in final form at http://jes.ecsdl.org/content/157/6/B814
منابع مشابه
Influence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells
A commercial Ti-Nanoxide was deposited on In-doped SnO2 (ITO) polymer substrates by tape casting technique with different thicknesses (7, 14 and 36μm) to be used as photoelectrode in flexible dye-sensitized solar cells (DSSCs). Ruthenium dye was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...
متن کاملPerformance and Stability of Dye Solar Cells on Stainless Steel
OF DOCTORAL DISSERTATION HELSINKI UNIVERSITY OF TECHNOLOGY P.O. BOX 1000, FI-02015 TKK http://www.tkk.fi Author Kati Miettunen Name of the dissertation Performance and Stability of Dye Solar Cells on Stainless Steel Manuscript submitted 05.06.2009 Manuscript revised 09.09.2009 Date of the defence 23.10.2009 Monograph Article dissertation (summary + original articles) Faculty Faculty of Informat...
متن کاملEffective enhancement of the performance of black dye based dye-sensitized solar cells by metal oxide surface modification of the TiO2 photoelectrode.
Effective enhancement of the performance of black dye based dye-sensitized solar cells has been achieved by MgO or Al(2)O(3) surface modification of the TiO(2) photoelectrode. The conversion efficiency was improved from 10.4% to 10.8% due to the blocking effect of the thin overlayer at the TiO(2) surface.
متن کاملSynthesis of TiO2 nanorods with a microwave assisted solvothermal method and their application as dye-sensitized solar cells
Inthiswork, Titanium dioxide (TiO2) nanostructures have beensynthesized via amicrowave assisted solvothermalmethod using titanium tetraisopropoxide (TTIP),polyvinylpyrrolidone(PVP) and Ascorbic Acid (AA) in ethanol. The mole ratio ofPVP/AA was found to be critical in determining the morphology and crystal phaseof the final product. PVP/AA mole ratio varied from 1 up to 1...
متن کاملDigital Printing of Titanium Dioxide for Dye Sensitized Solar Cells
Silicon solar cell manufacturing is an expensive and high energy consuming process. In contrast, dye sensitized solar cell production is less environmentally damaging with lower processing temperatures presenting a viable and low cost alternative to conventional production. This paper further enhances these environmental credentials by evaluating the digital printing and therefore additive prod...
متن کامل