Vibration Signatures, Wavelets and Principal Components Analysis in Diesel Engine Diagnostics
نویسندگان
چکیده
The vibration signatures of a normally aspirated diesel engine contain valuable information on the health of the combustion chamber components. It could be used to detect incipient faults in the engine. Several commonly occurring faults were induced in a 4-stroke diesel engine and the ensuing vibration signals recorded. Three diierent feature extraction techniques: Domain expertise, wavelet analysis and principal components analysis (PCA), were compared to evaluate the eeectiveness of each method. The extracted features were then used to develop artiicial neural nets based fault diagnostic systems. It was found that the best results were obtained with the wavelets based feature extraction technique. However, each of the three systems was shown to exhibit a high degree of accuracy. In a separate study, ensembles of 3 nets were created. The majority of ensembles performed better than any of the constituent nets, thus demonstrating the power of the technique of combining neural nets in majority voting systems.
منابع مشابه
Simulation of Small Diesel Engine Vibration using Artificial Neural Network
The use of bio-ethanol as an alternative diesel engine fuel is increasing rapidly. Bioethanol is mixed with diesel fuel in different ratios and used in CI and SI engines. Vibrations have direct effects on engine components and users when the engine is operated on a vehicle. For this reason, analysis of vibration resulting from combustion in IC engines is very important. In this study, evaluatio...
متن کاملDevelopment of balance shaft and flywheel for single cylinder diesel engine based on analytical approach and comparison with the simulation result
Vibration is a key factor of abrasion and destruction in the internal combustion engine. In internal combustion engines, the main causes of vibration is combustion pressure, connecting rod weight, piston weight and inertial forces. This vibration create corrosion and fracture in main part of engine such as crankshaft, camshaft and cylinder block in long time. This corrosion and fracture is effe...
متن کاملReal-time Inspection and Monitoring of Marine Diesel Engine Mechanical Parts by Computer Vision
Marine diesel engines’ parts are under various loads, usually time-varying, during their normal operation. This causes complex dynamical state of stress, and can produce unwanted high deformations and degradation of material, give a rise to critical crack growth and, finally, to failure of one or more of the engine parts.. The effect is further emphasized by marine atmosphere. This paper propos...
متن کاملFatigue Analysis and Optimization of Crankshaft of V8 Diesel Engine
The crankshaft is one of the most critically loaded components as it experiences cyclic loads in the form of bending and torsion during its service life. Its failure will cause serious damage to the engine so it’s important at the time of design to verify fatigue strength. More challenges in crankshaft design due to increasing vehicle payloads, lower weight requirement, higher efficiency and lo...
متن کاملEnergy and Exergy Analyses of a Diesel Engine Running on Biodiesel Fuel
Availability analysis is an effective approach to studying energy conversion in systems and identifying inefficiency. In the present study, a single-zone model was used to examine energy performance parameters and heat release rates. The governing equation of availability analysis was applied in the model, and the possibility of using biodiesel produced from sunflower oil as diesel engine was i...
متن کامل