Carbon fiber reinforced cement improved by using silane-treated carbon fibers

نویسنده

  • Yunsheng Xu
چکیده

The tensile strength of cement paste was increased by 56% and the modulus and ductility were increased by 39% by using silane-treated carbon fibers and silane-treated silica fume, relative to the values for cement paste with as-received carbon fibers and as-received silica fume. Silane treatment of fibers and silica fume contributed about equally to the strengthening. Silane treatment of fibers and silica fume also decreased the air void content. The strengthening and air void content reduction were less when the fiber treatment involved potassium dichromate instead of silane and even less when the treatment involved ozone. Silane’s effectiveness is due to its hydrophilic nature. © 1999 Elsevier Science Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites

Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...

متن کامل

Pii: S0008-6223(98)00115-8

Ozone treatment of isotropic-pitch-based carbon fiber was found to increase the surface oxygen concentration and change surface oxygen from C–O to CNO, thereby causing the contact angle between fiber and water to be decreased to zero. Thus, the bond strength between fiber and cement paste was increased and the tensile strength, modulus and ductility of carbon fiber reinforced cement paste were ...

متن کامل

Effect of silane activation on shear bond strength of fiber-reinforced composite post to resin cement

PURPOSE Among the surface treatment methods suggested to enhance the adhesion of resin cement to fiber-reinforced composite posts, conflicting results have been obtained with silanization. In this study, the effects of silanization, heat activation after silanization, on the bond strength between fiber-reinforced composite post and resin cement were determined. MATERIALS AND METHODS Six group...

متن کامل

Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers

In this study, the distribution of residual stress in fiber-reinforced nanocomposites is investigated. Fiber-reinforced nanocomposite is composed of three substances: carbon fiber, carbon nanotube (CNT), and polymer matrix. Unit cells in hexagonal packing array with different arrays as unit cell, 3*3 and 5*5 arrays have been selected as suitable for finite element analysis of residual stresses....

متن کامل

Carbon Nanotubes to Improve Short Glass Fiber Composites

This paper discusses the potential use of multi-walled carbon nanotubes (MWCNTs) to improve the mechanical properties of short glass fiber composites. Two methods to incorporate MWCNTs in short glass fiber composite fabrication were examined. First, Carboxylic-functionalized MWCNTs were dispersed in a silane fiber sizing material and then were allowed to bond to the surface of glass fibers. Sec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999