Mathematical and experimental analyses of antibody transport in hollow-fiber-based specific antibody filters.
نویسندگان
چکیده
We are developing hollow fiber-based specific antibody filters (SAFs) that selectively remove antibodies of a given specificity directly from whole blood, without separation of the plasma and cellular blood components and with minimal removal of plasma proteins other than the targeted pathogenic antibodies. A principal goal of our research is to identify the primary mechanisms that control antibody transport within the SAF and to use this information to guide the choice of design and operational parameters that maximize the SAF-based antibody removal rate. In this study, we formulated a simple mathematical model of SAF-based antibody removal and performed in vitro antibody removal experiments to test key predictions of the model. Our model revealed three antibody transport regimes, defined by the magnitude of the Damköhler number Da (characteristic antibody-binding rate/characteristic antibody diffusion rate): reaction-limited (Da /= 10). For a given SAF geometry, blood flow rate, and antibody diffusivity, the highest antibody removal rate was predicted for diffusion-limited antibody transport. Additionally, for diffusion-limited antibody transport the predicted antibody removal rate was independent of the antibody-binding rate and hence was the same for any antibody-antigen system and for any patient within one antibody-antigen system. Using SAF prototypes containing immobilized bovine serum albumin (BSA), we measured anti-BSA removal rates consistent with transport in the intermediate regime (Da approximately 3). We concluded that initial SAF development work should focus on achieving diffusion-limited antibody transport by maximizing the SAF antibody-binding capacity (hence maximizing the characteristic antibody-binding rate). If diffusion-limited antibody transport is achieved, the antibody removal rate may be raised further by increasing the number and length of the SAF fibers and by increasing the blood flow rate through the SAF.
منابع مشابه
Mathematical Modeling of Carbon Dioxide Removal from the CO2/CH4 Gas Mixture Using Amines and Blend of Amines in Polypropylene: A Comparison between Hollow Fiber Membrane Contactor and Other Membranes
In this work, a mathematical model is established to describe the removal of CO2 from gaseous mixtures including CH4 and CO2 in a polypropylene hollow fiber membrane contactor in the presence of conventional absorbents such as monoethanolamine (MEA), methyldiethanolamine (MDEA), and a blend of them. Modeling was performed in axial and radial directions under the fully-wet condition for counterc...
متن کاملModeling and Simulation of CO2 Absorption Enhancement in Hollow-Fiber Membrane Contactors using CNT–Water-Based Nanofluids
Absorption of CO2 from a gas mixture containing CO2 and nitrogen by water-based CNT nanofluids in gas–liquid hollow fiber membrane contactor was modeled and solved using COMSOL Multiphysics 5.4. The model assumed partial wetting of the membrane, along with diffusion in the axial and radial directions. In addition, Brownian motion and grazing effects were both considered in the model. The main c...
متن کاملMathematical Modeling and Numerical Simulation of CO2 Removal by Using Hollow Fiber Membrane Contactors
Abstract In this study, a mathematical model is proposed for CO2 separation from N2/CO2 mixtureusing a hollow fiber membrane contactor by various absorbents. The contactor assumed as non-wetted membrane; radial and axial diffusions were also considered in the model development. The governing equations of the model are solved via the finite...
متن کاملHigh molecular weight blood group A trisaccharide-polyacrylamide glycoconjugates as synthetic blood group A antigens for anti-A antibody removal devices.
Specific immunoadsorption of blood group antibodies by synthetic antigens immobilized on support matrices in the peri-transplantation period provides a promising solution to hyperacute rejection risk following ABO-incompatible transplantation. In this study, we investigated binding interactions between anti-A antibodies and synthetic blood group A trisaccharide conjugated with polyacrylamide of...
متن کاملGas Permeation Modeling through a Multilayer Hollow Fiber Composite Membrane
In this study, a time-dependent 2D axisymmetric model of a multilayer hollow fiber composite membrane for gas separation is proposed. In spite of the common multilayer membranes, which a dense layer coated on a porous support layer and subjected into the feed stream, here, the porous support is exposed to the feed gas. In this regard, the governing equations of species transport are developed f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Biotechnology progress
دوره 19 5 شماره
صفحات -
تاریخ انتشار 2003