Etherification of Glycerol with Propylene or 1-Butene for Fuel Additives
نویسندگان
چکیده
The etherification of glycerol with propylene over acidic heterogeneous catalysts, Amberlyst-15, S100, and S200 resins, produced mono-propyl glycerol ethers (MPGEs), 1,3-di- and 1,2-di-propyl glycerol ethers (DPGEs), and tri-propyl glycerol ether (TPGE). The propylation of glycerol over Amberlyst-15 yielded only TPGE. The glycerol etherification with 1-butene over Amberlyst-15 and S200 resins produced 1-mono-, 2-mono-, 1,2-di-, and 1,3-di-butyl glycerol ethers (1-MBGE, 2-MBGE, 1,2-DBGE, and 1,3-DBGE). The use of Amberlyst-15 resulted in the propylation and butylation of glycerol with higher yields than those obtained from the S100 and S200 resins. The PGEs, TPGE, and BGEs were evaluated as cold flow improvers and octane boosters. These alkyl glycerol ethers can reduce the cloud point of blended palm biodiesels with diesel. They can increase the research octane number and the motor octane number of gasoline.
منابع مشابه
Olefin production from catalytic cracking of light fuel oil over different additives
The catalytic cracking of a fuel oil over fluid catalytic cracking (FCC) catalyst has been investigated applying different additives. Catalyst mixtures consisting of a equilibrium FCC catalyst (E-Cat) blended with ZSM-5, MCM-41 and Mordenite additives were examined at the additive levels of 25 wt.%. The catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (MAT...
متن کاملSynthesis of oxygenated fuel additives via the solventless etherification of glycerol.
The synthesis of oxygenated fuel additives via solvent freebase-catalyzed etherification of glycerol is reported. The products of glycerol etherification arediglycerol (DG) and triglycerol (TG) with DG being the favorable one. The catalytic activity of different homogeneous alkali catalysts (LiOH, NaOH, KOH and Na(2)CO(3)) was investigated during the glycerol etherification process. LiOH exhibi...
متن کاملOlefin production from catalytic cracking of light fuel oil over different additives
The catalytic cracking of a fuel oil over fluid catalytic cracking (FCC) catalyst has been investigated applying different additives. Catalyst mixtures consisting of a equilibrium FCC catalyst (E-Cat) blended with ZSM-5, MCM-41 and Mordenite additives were examined at the additive levels of 25 wt.%. The catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (MAT...
متن کاملHigh selectivity production of propylene from 2-butene: non-degenerate pathways to convert symmetric olefins via olefin metathesis.
The first example of propylene production from 2-butene in promising yield is described by reacting trans-2-butene over tungsten hydrides precursor W-H/Al(2)O(3) at 150 °C and different pressures in a continuous flow reactor. The tungsten carbene-hydride active site operates as a "bi-functional catalyst" through the disfavoured 2-butene isomerisation on W-hydride and 2-butenes/1-butene cross-me...
متن کاملHomo-polymerization of α-Olefins and Co-polymerization of Higher α-Olefins with Ethylene in the Presence of CpTiCl2(OC6H4X-p)/MAO Catalysts
Cyclopentadienyl-titanium complexes containing –OC6H4X ligands (X = Cl, CH3) activated with methylaluminoxane (MAO) were used in the homo-polymerization of ethylene, propylene, 1-butene, 1-pentene, 1-butene, and 1-hexene, and also in copolymerization of ethylene with the α-olefins mentioned. The -X substituents exhibit different electron donor-acceptor properties, which is described by Hammett’...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2017 شماره
صفحات -
تاریخ انتشار 2017