Sinter-crystallization in the diopside–albite system Part II. Kinetics of crystallization and sintering

نویسندگان

  • Alexander Karamanov
  • Mario Pelino
چکیده

The formation of intragranular pores, induced by diopside crystallization in diopside–albite glasses, was highlighted in a previous study and here confirmed by SEM observation. The sinter-crystallization kinetics of four glass compositions, labelled G1, G2, G3 and G2-Cr, characterized by the formation of induced crystallisation porosity, PCR, was investigated. The activation energies of crystallisation, EC, and sintering, ES, were evaluated by differential thermal analysis (DTA) and by contact differential dilatometer in non-isothermal conditions, respectively. The results highlighted that the kinetics of the crystallization process was not influenced by the PCR formation and that the EC values are in a

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Properties of sintered glass-ceramics in the diopside–albite system

A series of sintered glass-ceramics belonging to the system diopside–albite, forming by surface crystallization 30, 50 and 65% diopside, was investigated. In order to study the effect of bulk crystallization on the sintering a 0.7% of Cr2O3 as nucleation agent was added in one of the compositions. The crystallization was evaluated by DTA and density measurements and the degree of densification ...

متن کامل

Sinter-crystallisation in the diopside–albite system Part I. Formation of induced crystallisation porosity

The sinter-crystallisation was investigated in three model glasses (G1, G2 and G3) belonging to the diopside–albite system and forming between 30 and 60% diopside, respectively. The effect of bulk crystallisation on the sintering was studied by the addition of 0.7 wt.% Cr2O3 as nucleating agent to the G2 glass. The degree of sintering was evaluated by the variation of the apparent density while...

متن کامل

Induced crystallization porosity and properties of sintereds diopside and wollastonite glass-ceramics

diopside (CaO·MgO·2SiO2) and wollastonite (CaO·SiO2) glass-ceramics, forming ∼60% crystal phase and ∼40% albite-like Na2O·Al2O3·6SiO2) residual glass were studied. Two other diopside glass-ceramics with higher Na2O and Al2O3 content were also investigated. The phase formation was estimated by DTA, XRD and pycnometry, while the densification process was evaluated by porosity variations, ilatomet...

متن کامل

Sinter-crystallization of a glass obtained from basaltic tuffs

Glass-ceramic materials, obtained by sinter-crystallization of melted alkaline-olivine basaltic tuffs, were investigated. The kinetics of bulk crystallization was evaluated by differential thermal analysis (DTA) at different heating rates. The phase formation and the sintering behavior of glass powders (<75 lm) were studied in air and in nitrogen atmospheres by DTA and dilatometry, respectively...

متن کامل

Bioactive Glass-Ceramic Scaffolds from Novel ‘Inorganic Gel Casting’ and Sinter-Crystallization

Highly porous wollastonite-diopside glass-ceramics have been successfully obtained by a new gel-casting technique. The gelation of an aqueous slurry of glass powders was not achieved according to the polymerization of an organic monomer, but as the result of alkali activation. The alkali activation of a Ca-Mg silicate glass (with a composition close to 50 mol % wollastonite-50 mol % diopside, w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006