Design of a Wide-Band Lumped-Element 3-dB Quadrature Coupler

نویسندگان

  • Yi-Chyun Chiang
  • Chong-Yi Chen
چکیده

Analysis and design techniques for designing a lumped-element 3-dB quadrature coupler with wide-band flat coupling are proposed for microwave integrated-circuit/monolithic-microwave integrated-circuit applications. The proposed design technique can produce a coupler with flat coupling over 50% fractional bandwidth, which is wider than the conventional lumped-element design methods. A prototype consisting of a capacitive coupled high-pass network is designed and fabricated to verify the design concept. Measurement and simulation results closely correspond to each other.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electronically tunable lumped element 90 hybrid coupler

Introduction: With the increasing variety of commercial wireless applications, there is now a requirement to incorporate several transceivers into a single hardware device [1]. To achieve high integration and minimise costs, it is an advantage to design transceivers that can be reconfigured for different frequency bands or share common blocks, rather than implementing the transceivers separatel...

متن کامل

Design of Microwave MCM-D CPW Quadrature Couplers and Power Dividers in X-, Ku- and Ka- band

The successful design and measurement of high-performance coplanar waveguide (CPW) quadrature hybrid couplers integrated in MCM-D at Ku and Ka-band and Wilkinson power dividers at X-band are discussed in this work. The authors have investigated the feasibility of integrating 3-dB quadrature couplers in the MCM-D technology. Quadrature couplers based on two edge-coupled lines are not practical, ...

متن کامل

Analysis and Design of a 3 dB Tunable Lumped-Element Directional Coupler

⎯An analysis of a 3 dB lumped-element directional coupler (LEDC) based on arbitrary terminal impedance is described numerically. To solve the conflicted requirement for broad bandwidth and small size in LEDC, a new structure of coupler is introduced, which can significantly improve bandwidth and whose size is only 3 cm×4 cm on the conditions of the frequency domain of 410 MHz to 490 MHz. The me...

متن کامل

A Small Printed Quadrifilar Helical Antenna for BGAN/GPS Applications

This paper presents an element of a 2×2-element array antenna for Inmarsat BGAN/GPS applications. The element is an axial mode printed quadrifilar helical antenna that has been integrated with a compact feed network to provide sequential phase rotation for circular polarization (CP) radiation. The novel integrated lumped-element feed network is designed to provide a balanced RF power to the fou...

متن کامل

A Design of Compact Microwave Six-Port Device for Ultra-Wideband Applications

A compact fully integrated wideband six-port device composed of a suspended stripline Wilkinson power divider and three bias stripline of 3-dB quadrature directional couplers is presented. In order to integrate a six-port circuit, a multilayer circuit structure has been adopted by the via hole interconnection at the output port of the divider. The 3-dB quadrature directional coupler is composed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001