The Effect of Molecular Weight on the Gelation Behavior of Regenerated Silk Solutions

نویسندگان

  • Hee Jung Cho
  • Chul Um
چکیده

The various molecular weight (MW) regenerated silk fibroins were prepared with different dissolution condition and the effect of MW on the gelation behavior of regenerated aqueous silk fibroin (SF) solution was investigated. The result of gelation time measurement indicated that the gelation of SF aqueous solution was accelerated by the increase of MW and SF concentration. When formic acid was added in SF aqueous solution, the gelation time of SFL and SFC30 aqueous solution showed a significant decreaseat 0.03% formic acid addition. In case of the lowest MW sample, SFC180, SF molecules became aggregated and precipitated without gelation after 28 days storage time. These findings indicate that MW control of SF can be utilized to control the gelation time of SF aqueous solution.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Gelation Behaviors and Mechanism of Silk Fibroin According to the Addition of Nitrate Salts

Silk fibroin (SF) is a typical fibrous protein that is secreted by silkworms and spiders. It has been used in a variety of areas, and especially for tissue-engineering scaffolds, due to its sound processability, mechanical properties, biodegradability, and biocompatibility. With respect to gelation, the SF gelation time is long in aqueous solutions, so a novel approach is needed to shorten this...

متن کامل

Silk Fibroin Degradation Related to Rheological and Mechanical Properties.

Regenerated silk fibroin has been proposed as a material substrate for biomedical, optical, and electronic applications. Preparation of the silk fibroin solution requires extraction (degumming) to remove contaminants, but results in the degradation of the fibroin protein. Here, a mechanism of fibroin degradation is proposed and the molecular weight and polydispersity is characterized as a funct...

متن کامل

Effect of Polymer Grade and Plasticizer Molecular Weights on Viscoelastic Behavior of Coating Solutions

Film coating solutions containing different grades of HPMC (E5, E15 and E50) with and without polyethylene glycol (with various molecular weights) were examined by an oscillatory method, using Haake CV 100 rheometer. Fundamental rheological parameters (?, G? and G² ) were measured over the frequency range from 0.04 to 2 Hz. The variation with frequency of the loss tangent (a ratio of viscous to...

متن کامل

Electrospinning Bombyx mori silk with poly(ethylene oxide).

Electrospinning for the formation of nanoscale diameter fibers has been explored for high-performance filters and biomaterial scaffolds for vascular grafts or wound dressings. Fibers with nanoscale diameters provide benefits due to high surface area. In the present study we explore electrospinning for protein-based biomaterials to fabricate scaffolds and membranes from regenerated silkworm silk...

متن کامل

Effect of Polymer Grade and Plasticizer Molecular Weights on Viscoelastic Behavior of Coating Solutions

Film coating solutions containing different grades of HPMC (E5, E15 and E50) with and without polyethylene glycol (with various molecular weights) were examined by an oscillatory method, using Haake CV 100 rheometer. Fundamental rheological parameters (?, G? and G² ) were measured over the frequency range from 0.04 to 2 Hz. The variation with frequency of the loss tangent (a ratio of viscous to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011