Study on Dual Wide Band Frequency Selective Surface for Different Incident Angles
نویسنده
چکیده
This paper deals with single layer Frequency selective surface (FSS) which acts as a double band reject filter. The two stop bands are really broad with percentage bandwidth of 26.67% and 14.53%. The maximum and minimum band separation for this proposed design is around 45 dB and frequency ratio is more than 1.9.This results are almost same for different incident angles.. This design is investigated theoretically by ANSOFT® Designer software and practically by standard microwave test bench and the both results show a good agreement.
منابع مشابه
Fractal FSS: a novel dual-band frequency selective surface - Antennas and Propagation, IEEE Transactions on
The multiband properties of self-similar fractals can be advantageously exploited to design multiband frequency selective surfaces (FSS). A Sierpinski dipole FSS has been analyzed and measured and the results show an interesting dual-band behavior. Furthermore a near-field measurement technique is applied to characterize the FSS response to different angles of incidence. Finally, it will be sho...
متن کاملDual-band, Dynamically Tunable Plasmonic Metamaterial Absorbers Based on Graphene for Terahertz Frequencies
In this paper, a compact plasmonic metamaterial absorber for terahertz frequencies is proposed and simulated. The absorber is based on metamaterial graphene structures, and benefits from dynamically controllable properties of graphene. Through patterning graphene layers, plasmonic resonances are tailored to provide a dual band as well as an improved bandwidth absorption. Unit cell of the design...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملA Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies
In this paper, an ultra-wideband metamaterial absorber is designed and simulated. The proposed absorber is planar and low profile. It is made of a copper sheet coated with two dielectric layers. Each unit cell of the metamaterial structure is composed of multiple metallic split rings, which are patterned on the top and middle boundaries of the dielectrics. The designed absorber utilizes differe...
متن کاملA dual-band fractal FSS with SZ curve elements
A novel dual-band miniaturized frequency selective surface adopting fractal elements is proposed. The proposed structure is composed of interconnected four SZ curves of second generation. Such a design is to provide two pass-bands with stable performance, the first band resonates at S-band with a center frequency of 3.02GHz and the second band is at C-band centered at 7.22GHz. In addition, the ...
متن کامل