Analysis of Massless Elastic Chains with Servo Controlled Joints
نویسنده
چکیده
The lumping approximation us·ed fre'quently for dynamic analysis of distributed parameter sys.tems is facilitated for a class of flexible systems by a technique developed here using 4x4 coordinate transformation matrices to account for the deflection of elastic elements under load. This technique is used to develop the linear equations of spatial motion for a system of two rigid masses connected by a chain with an arbitrary number of mas.sless beams and controlled joint rotations.
منابع مشابه
Load Controlled Fatigue of AZ31B
With the expanding demand on application of magnesium alloys in automotive and aerospace industries, robust methods in fatigue characterization of commercially available magnesium alloys with high specific strength is anticipated. In this paper, rotating bending load controlled tests has been studied on specimens machined from an extrusion piece of AZ31B. Due to asymmetric and anisotropic behav...
متن کاملDeformational Characteristics of Rocks Containing a Single Discontinuity (TECHNICAL NOTE)
For the purpose of exploring deformation characteristics of jointed rock masses, influence of joint inclination and confining pressure on the mechanical behavior of discontinuous rock a series of compression tests were conducted under satisfactory testing conditions on three types of sandstone from various locations. Three groups of jointed specimens were used in this research, including specim...
متن کاملHarnessing the robot's body dynamics: a global dynamics approach
While bipedal walking robots developed recently are based on high-gain servo to planned trajectory, our purpose is to make a robot’s behavior more natural: exploiting useful feature of the dynamics of the body itself. A new concept for controlling humanoid robots, the global dynamics approach is proposed. This is to harness the robot body by applying control input intensively around critical po...
متن کاملSynthesis and analysis of elastic high-speed cam-operated mechanisms
A cam driving a lumped inertia through a massless, elastic, slider-crank fol lower linkage with two concentrated masses located at the pin joints is considered. An iterative procedure taking the elasticity, damping, and changing geometry of the linkage into account is developed for synthesizing the cam profile to produce a desired output motion at a given design speed. The steady state solutio...
متن کاملInteger-order Versus Fractional-order Adaptive Fuzzy Control of Electrically Driven Robots with Elastic Joints
Real-time robust adaptive fuzzy fractional-order control of electrically driven flexible-joint robots has been addressed in this paper. Two important practical situations have been considered: the fact that robot actuators have limited voltage, and the fact that current signals are contaminated with noise. Through of a novel voltage-based fractional order control for an integer-order dynamical ...
متن کامل