Influence of the formulation of an alumina powder on compaction
نویسندگان
چکیده
The compression of ceramic powders requires the addition of organic materials to insure tablet cohesion. For the compaction of formulated ceramic powders it is necessary to supply them energy. As a function of the formulation of ceramic powders, one can measure the specific energy acquired during the tablet compression. Recently, a technique used in powder metallurgy, High Velocity Compaction (HVC), has been studied to form ceramic compacts. This method brings special physical properties to tablets in terms of homogeneity compared to conventional uniaxial pressing. The properties of tablets prepared by the two processes are compared and discussed through a phenomenological model.
منابع مشابه
AN INFLUENCE OF PHASE DEVELOPMENT ON MECHANICAL STRENGTH OF ALUMINA-COPPER JOINT PREPARED BY MOLYMn METHOD
Abstract: The effect of phase development on peel strength of alumina-copper metalized joint has been investigated. The alumina-copper joint was prepared in three stages. The alumina substrate was, first, metalized at 1500°C in H2-furnace by a new formulation. In the second step, a nickel layer was electroplated on the metalized layer with approximately 10µm thickness. Finally, copper strip...
متن کاملExperimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملOptimized Slurries for Spray Drying: Different Approaches to Obtain Homogeneous and Deformable Alumina-Zirconia Granules
Spray drying is widely used for producing granulated feed materials for compaction process, which is the current industrial method for manufacturing alumina-zirconia femoral heads. The optimization of the granules compaction behavior requires the control of the slurry rheology. Moreover, for a dual-phase ceramic suspension, the even phase distribution has to be kept through the atomization step...
متن کاملAn Arbitrary Lagrangian-eulerian Finite Element Method for Cone-cap Plasticity; Application to Powder Compaction Simulation
The compaction forming of metal powder is a process involving large deformations, large strain, non-linear material behavior and friction. Consequently, the numerical analysis of such a highly non-linear process is a formidable computational problem. In this paper, an ALE technique is presented based on a generalized cap plasticity model in simulation of powder forming processes. In ALE formula...
متن کاملStudy of Compaction and Ejection Properties of Powder Mixes Processed by Warm Compaction
Warm compaction takes advantage of temperature to favor densification during compaction. However, this technique requires powder mixes with specific physical characteristics to be adequately processed in the temperature range involved in warm pressing. The mix formulation, especially the lubricant/binder system, should provide good flowability and compressibility and lubrication of the die wall...
متن کامل