Miniaturized fiber inline Fabry-Perot interferometer fabricated with a femtosecond laser.

نویسندگان

  • Tao Wei
  • Yukun Han
  • Hai-Lung Tsai
  • Hai Xiao
چکیده

We report a miniaturized inline Fabry-Perot interferometer directly fabricated on a single-mode optical fiber with a femtosecond laser. The device had a loss of 16 dB and an interference visibility exceeding 14 dB. The device was tested and survived in high temperatures up to 1100 degrees C. With an accessible cavity and all-glass structure, the new device is attractive for sensing applications in high-temperature harsh environments.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Temperature-insensitive miniaturized fiber inline Fabry-Perot interferometer for highly sensitive refractive index measurement.

We report a miniaturized fiber inline Fabry-Perot interferometer (FPI), with an open micro-notch cavity fabricated by one-step fs laser micromachining, for highly sensitive refractive index measurement. The device was tested for measurement of the refractive indices of various liquids including isopropanol, acetone and methanol at room temperature, as well as the temperature-dependent refractiv...

متن کامل

Fabry-Perot interferometer embedded in a glass chip fabricated by femtosecond laser.

We report a simple Fabry-Perot interferometer (FPI) embedded in a glass chip, which is capable of precisely measuring the refractive indices of liquid samples. The microdevice is the integration of a single-mode optical fiber and a microchannel in the photosensitive glass fabricated by femtosecond laser followed by thermal treatment, wet etching, and annealing. The function of the FPI is demons...

متن کامل

Optical fiber Fabry-Perot interferometer cavity fabricated by femtosecond laser micromachining and fusion splicing for refractive index sensing.

We demonstrate a fiber in-line Fabry-Perot interferometer cavity sensor for refractive index measurement. The interferometer cavity is formed by drilling a micro-hole at the cleaved fiber end facet, followed by fusion splicing. A micro-channel is inscribed by femtosecond laser micromachining to vertically cross the cavity to allow liquid to flow in. The refractive index sensitivity obtained is ...

متن کامل

A IR-Femtosecond Laser Hybrid Sensor to Measure the Thermal Expansion and Thermo-Optical Coefficient of Silica-Based FBG at High Temperatures

In this paper, a hybrid sensor was fabricated using a IR-femtosecond laser to measure the thermal expansion and thermo-optical coefficient of silica-based fiber Bragg gratings (FBGs). The hybrid sensor was composed of an inline fiber Fabry-Perot interferometer (FFPI) cavity and a type-II FBG. Experiment results showed that the type-II FBG had three high reflectivity resonances in the wavelength...

متن کامل

R203 Wei Final Report Cover Page

This paper demonstrates the chemical sensing capability of a miniaturized fiber inline Fabry-Pérot sensor fabricated by femtosecond laser. Its accessible cavity enables the device to measure the refractive index within the cavity. The refractive index change introduced by changing the acetone solution concentration was experimentally detected with an error less than 4.2×10.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 33 6  شماره 

صفحات  -

تاریخ انتشار 2008