Diesel Engine Injector Faults Detection Using Acoustic Emissions Technique
نویسندگان
چکیده
This study focuses on investigation of the method of identifying injector faults in a JCB 444T2 diesel engine using acoustic emission (AE) technique. Different kinds of injector faults were seeded in the four-cylinder, four-stroke, and turbo-engine. Then, faulty injectors are tested to evaluate AE based injection fault detection. The AE signals recorded from the tests were processed in the angular, frequency and joint angular-frequency domain. The results from joint angular-frequency analysis have shown that AE can clearly monitor the changes in the combustion process due to its high signal to noise ratio, where other vibro-acoustic sources have little influence. Using features in the AE signal, faults of injector can be identified during the operation of the engine.
منابع مشابه
Conversion of Diesel Engine to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review
This paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection CNG engine. The objective of this study was to review the previous research in the development of gaseous fuel injector for port injection CNG engine converted from diesel engine. Next, a simulation of the fuel flow of the new injector nozzle was made using FLU...
متن کاملAcoustic Emission Sensing for Maritime Diesel Engine Performance and Health
Monitoring and analysis of high frequency acoustic emissions on marine diesel engines may indicate their condition with the aim to increase engine availability and reduce maintenance overheads for the Defence Force. An experimental study was undertaken to evaluate the application of acoustic emission (AE) sensing to the monitoring of both petrol and diesel internal combustion engine operating c...
متن کاملOptimizing diesel engine parameters for low emissions using Taguchi method: variation risk analysis approach—Part I
An experimental study has been carried out to simultaneously optimize several diesel engine designs and operating parameters for low exhaust emissions using Taguchi method. A single cylinder (DPF make) diesel engine equipped with a high pressure, cam driven mechanical injector has been used in this experiment. The effects of changes in engine design/operating parameters–nozzle spray holes, pist...
متن کاملRotating injector in DI diesel engine for improving performance and reducing NOx emission
Oxides of Nitrogen are the major emission from a diesel engine. It is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of NO is promoted. Various techniques are therefore employed to reduce the NOX emission like EGR, SCR, etc. In this present work a rotating injector is a tec...
متن کاملAcoustic Monitoring of Engine Fuel Injection Based on Adaptive Filtering Techniques
Diesel engines injection process is essential for optimum operation to maintain the design power and torque requirements and to satisfy stricter emissions legislations. In general this process is highly dependent upon the injection pump and fuel injector health. However, extracting such information about the injector condition using needle movements or vibration measurements without affecting i...
متن کامل