Ultra-thin broadband nanostructured insulator-metal-insulator-metal plasmonic light absorber.

نویسندگان

  • Aliaksandr Hubarevich
  • Aliaksandr Kukhta
  • Hilmi Volkan Demir
  • Xiaowei Sun
  • Hong Wang
چکیده

An ultra-thin nanostructured plasmonic light absorber with an insulator-metal-insulator-metal (IMIM) architecture is designed and numerically studied. The IMIM structure is capable to absorb up to about 82.5% of visible light in a broad wavelength range of 300-750 nm. The absorption by the bottom metal is only 6% of that of the top metal. The results show that the IMIM architecture has weak dependence of the angle of the incident light. Interestingly, by varying the top insulator material the optical absorption spectrum can be shifted more than 180 nm as compared to the conventional air-metal-insulator-metal structure. The IMIM structure can be applied for different plasmonic devices with improved performance.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Broadband polarization-independent resonant light absorption using ultrathin plasmonic super absorbers.

Resonant plasmonic and metamaterial structures allow for control of fundamental optical processes such as absorption, emission and refraction at the nanoscale. Considerable recent research has focused on energy absorption processes, and plasmonic nanostructures have been shown to enhance the performance of photovoltaic and thermophotovoltaic cells. Although reducing metallic losses is a widely ...

متن کامل

Rapid-Response Low Infrared Emission Broadband Ultrathin Plasmonic Light Absorber

Plasmonic nanostructures can significantly advance broadband visible-light absorption, with absorber thicknesses in the sub-wavelength regime, much thinner than conventional broadband coatings. Such absorbers have inherently very small heat capacity, hence a very rapid response time, and high light power-to-temperature sensitivity. Additionally, their surface emissivity can be spectrally tuned ...

متن کامل

Design and Simulation of a Metal-Insulator-Metal Filter Based on Plasmonic Split Ring

In this paper, a plasmonic filter made of a split ring, two U-shaped structures and two straight waveguides is designed and investigated. In the proposed structure, the split ring and U-shaped structures are situated between straight waveguides. Simulations are done based on FDTD method. Split ring, U-shaped structures and straight waveguides are made of air in the silver background. In the pro...

متن کامل

Propose, Analysis and Simulation of an All Optical Full Adder Based on Plasmonic Waves using Metal-Insulator-Metal Waveguide Structure

This paper proposes a full adder with minimum power consumption and lowloss with a central frequency of 1550nm using plasmonic Metal-Insulator-Metal (MIM)waveguide structure and rectangular cavity resonator. This full adder operates based onXOR and AND logic gates. In this full adder, the resonant wave composition of the firstand second modes has been used and we have ob...

متن کامل

High Performance Sub-Diffraction Limit Three Channel Plasmonic Demultiplexer

We have proposed a new ultra-compact optical demultiplexer based on metal-insulator-metal plasmonic waveguides aperture-coupled to the ring resonators. Our proposed device has high performance, small footprint, and high potential for integration and development to more channels.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 23 8  شماره 

صفحات  -

تاریخ انتشار 2015