Modeling and Performance Analysis of Giant Magnetostrictive Microgripper with Flexure Hinge
نویسندگان
چکیده
Abstract. In order to improve the steady output of micrgripper, the giant magnetostrictive micrgripper with flexure hinge is taken as the research object . Its structure and working principle are presented .the static performance experiments are done and the better linear work domain is found. On the basis of that the dynamic model of the microgripper is established and the formula of the microgripper’s output displacement is deduced. the relationship between the microgripper’s parameters and responses are analyzed and open-loop simulation step is done, The simulation results show the giant magnetostrictive material(GMM) rod damp effects on the response time and its quality has little influence.
منابع مشابه
Mechanical design, analysis and testing of a large-range compliant microgripper
This paper presents the mechanical design, analysis, fabrication, and testing procedures of a new large-range microgripper which is based on a flexible hinge structure. The uniqueness of the gripper is that the gripper arms not only provide large gripping range but also deliver approximately rectilinear movement as the displacement in nonworking direction is extremely small. The large gripping ...
متن کاملLarge Stroke Performance Optimization of Spatial Flexure Hinges
Flexure hinges inherently lose stiffness in supporting directions when deflected. In this paper a method is presented for optimizing the geometry of flexure hinges, while supporting stiffnesses are retained. These hinges are subjected to a load and deflected an angle of up to ±20°. The measure of performance is defined by the first unwanted eigenfrequency, which is closely related to the suppor...
متن کاملCompliances calculation and performance analysis of Half Circular-Elliptical Hybrid flexure hinges
A novel flexure hinge named half circular-elliptical hybrid flexure hinge was presented. Based on Castigliano’s Displacement Theorem, the compliance equations of the novel flexure hinge were formulated. A computer aided analysis and parametric design program of the half circular-elliptical hybrid flexure hinge was developed by VC++6.0. A specific half circular-elliptical hybrid flexure hinge wa...
متن کاملA Generic Compliance Modeling Method for Two-Axis Elliptical-Arc-Filleted Flexure Hinges
As a kind of important flexible joint, two-axis flexure hinges can realize in-plane and out-of-plane motions and can be used for constructing flexure-based spatial compliant mechanisms. The paper introduces a common two-axis elliptical-arc-filleted flexure hinge that is generated by two different elliptical-arc-filleted cutout profiles and that provides some new hinge types. The analytical comp...
متن کاملA microgripper using piezoelectric actuation for micro-object manipulation
Design, fabrication and tests of a monolithic compliant-flexure-based microgripper were performed. The geometry design and the material tresses were considered through the finite element analysis. The simulation model was used to study in detail profiles of von Mises stresses nd deformation. The maximum stress in the microgripper is much smaller than the critical stress values for fatigue. The ...
متن کامل