Melting and homogeneity in germanium--silicon alloys and a modified micro-manufactured assembly for stable high pressure and temperature measurements•
نویسنده
چکیده
Melting and homogeneity in germanium–silicon alloys and a modified micro-manufactured assembly for stable high pressure and temperature measurements G. Serghiou, N. Odling, R. Hunter, A. Abbie, B. Armstrong & C. Lathe a School of Engineering, University of Edinburgh, Kings Buildings, Mayfield Road, Edinburgh EH9 3JL, UK b The Grant Institute, School of Geosciences, University of Edinburgh, Kings Buildings, West Mains Road, Edinburgh EH9 3JW, UK c Helmholtz Zentrum Potsdam, GeoForschungsZentrum GFZ, D-14473 Potsdam, Germany Published online: 31 Jan 2014.
منابع مشابه
Modified Enthalpy Method Applied to Laser Annealing of Semi Conductor Films
The rapid melting of silicon film due to the absorption of a CW laser beam radiation is studied. The silicon film melting and recrystallization is mainly controlled by the temperature distribution in the semiconductor. The enthalpy technique for the solution of phase change problems is used in an explicit finite difference form to calculate the transient temperature distribution in the silicon ...
متن کاملOptimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm
Cu–Cr-Zr alloys had wide applications in engineering applications such as electrical and welding industrial especially for their high strength, high electrical as well as acceptable thermal conductivities and melting points. It was possible to prepare the nano-structure of these age hardenable alloys using mechanical alloying method as a cheap and mass production technique to prepare the non-eq...
متن کاملHole drift mobility measurements in amorphous silicon-carbon alloys
Hole drift mobilities have been measured using photocarrier time-of-l-light for several hydrogenated amorphous silicon-carbon alloy specimens. We find that, as the band gap increases, the hole drift mobility remains essentially constant. The temperature and dispersion properties were broadly consistent with hole multiple trapping in the valence bandtail. In conjunction with previous drift mobil...
متن کاملTechniques for Measuring the Composition of Hydrogenated Amorphous Silicon-Germanium Alloys: Preprint Prepared for ICAMS
We grow hydrogenated amorphous silicon-germanium alloys by the hot-wire chemical vapor deposition technique at deposition rates between 0.5 and 1.4 nanometers per second. We prepared a set of these alloys to determine the concentrations of the alloying elements as measured by various techniques. This set consists of samples throughout the range of germanium alloying from 0% (a-Si:H) to 100% (a-...
متن کاملMolecular Dynamics Simulation of Potassium Chloride Melting (II. Constant Volume and Constant Pressure Simulation of Filled System)
We have used a simple ionic potential to simulate the melting of KCI pseudo-infinite crystal. Two MD simulations, one with constant Volume and the other with constant pressure condition are performed. These results are compared with the previous micro-sample simulation results. In the constant volume simulation the melting temperature increase substantially with increasing pressure. A method fo...
متن کامل