Upper bound for the magnetic force gradient in graphite.

نویسندگان

  • David Martínez-Martín
  • Miriam Jaafar
  • Rubén Pérez
  • Julio Gómez-Herrero
  • Agustina Asenjo
چکیده

In this work we investigate possible ferromagnetic order on the graphite surface by using magnetic force microscopy (MFM). Our data show that the tip-sample interaction along the steps is independent of an external magnetic field. Moreover, by combining kelvin probe force microscopy and MFM, we are able to separate the electrostatic and magnetic interactions along the steps obtaining an upper bound for the magnetic force gradient of 16 μN/m. Our experiments suggest the absence of ferromagnetic signal in graphite at room temperature.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Supplementary material for An upper bound for the magnetic force gradient in graphite

Cobalt-coated PPP-MFMR NanoSensors cantilevers were used in dynamic mode. The stiffness and resonance frequency of the cantilevers used for the experiments reported in figs. 1 and 2 in the letter were k= 1.5 N/m, f0= 69 kHz and k= 1.2 N/m and f0= 59 kHz respectively (k was determined using Sader’s method [1]). The magnetic probes used in our experiments have been characterized by scanning the m...

متن کامل

A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies

In this paper, an upper bound approach is used to analyze the extrusion process of bimetallic rods through arbitrarily curved dies. Based on a spherical velocity field, internal, shearing and frictional power terms are calculated. The developed upper bound solution is used for calculating the extrusion force for two types of die shapes: a conical die as a linear die profile and a streamlined di...

متن کامل

An Upper Bound Analysis of Sandwich Sheet Rolling Process

In this research, flat rolling process of bonded sandwich sheets is investigated by the method of upper bound. A kinematically admissible velocity field is developed for a single layer sheet and is extended into the rolling of the symmetrical sandwich sheets. The internal, shear and frictional power terms are derived and they are used in the upper bound model. Through the analysis, the rolling ...

متن کامل

Analysis of Axisymmetric Extrusion Process through Dies of any Shape with General Shear Boundaries

In this paper, a generalized expression for the flow field in axisymmetric extrusion process is suggested to be valid for any dies and the boundary shapes of the plastic deformation zone. The general power terms are derived and the extrusion force is calculated by applying upper bound technique for a streamlined die shape and exponential functions for shear boundaries. It is shown that assuming...

متن کامل

On the Optimum Die Shape in Rod Drawing Process Considering Work-Hardening Effect of Material

The assessment of the influence of the work-hardening of material on the optimum die profile and drawing force  in rod drawing process is the main objective of the present paper. The upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the rod drawing process through curved dies. Analytical results of drawin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 105 25  شماره 

صفحات  -

تاریخ انتشار 2010