Asymmetric Very Large Mode Area Fiber with Enhanced Higher Order Mode Delocalization
نویسندگان
چکیده
A novel very-large-mode-area asymmetric rod-type fiber was fabricated and experimentally characterized. The fiber supports effective and robust single-mode operation for a core diameter of 66μm making it attractive for high power amplifier systems. OCIS codes: (060.2280) Fiber design and fabrication, (030.4070) Modes, (060.2320) Fiber optics amplifiers and oscillators.
منابع مشابه
Reduced-symmetry LMA rod-type fiber for enhanced higher-order mode delocalization.
We present a novel design of a micro-structured large-pitch, large-mode-area (LMA) asymmetric rod-type fiber. By reducing the cladding symmetry through six high-refractive index germanium-doped silica inclusions, the fiber features strong higher-order mode (HOM) delocalization, leading to a potentially enhanced preferential gain for the fundamental mode in active fibers. In addition, high resol...
متن کاملGas Sensor Based on Large Hollow-Core Photonic Bandgap Fiber
One concern in using photonic band-gap fiber (PBGF) as a gas sensor is the response time. In this type of the gas sensors, response time is the time required for gas to diffuse into the hollow-core. So considering a large hollow-core PBGF (HC-PBGF), the response time can be significantly reduced. But in the large HC-PBGF, the fundamental issue is the presence of higher order modes (HOMs). Somet...
متن کاملExtending single mode performance of all-solid large-mode-area single trench fiber.
We report a novel "single trench fiber" design for mode area scaling of the fundamental mode while offering effective single mode operation for a compact fiber laser device. This fiber design allows very high suppression of the higher order modes by offering high loss and power delocalization. It has the advantages of low cost and easy fabrication thanks to all solid fiber design, cylindrical s...
متن کاملUsing of Broadened Asymmetric Waveguide Structure for 980nm Diode Laser
Laser diode beam divergence is the main parameter for beam shaping and fiber optic coupling. Increasing the waveguide layer thickness is the conventional method to decrease the beam divergence. In this paper, the broadened asymmetric waveguide is introduced to decrease the divergence without increasing the optical power. The asymmetric waveguide was used to shift the vertical optical field to n...
متن کاملLarge-mode-area photonic crystal fiber with double lattice constant structure and low bending loss.
We report on a bendable photonic crystal fiber for short pulse high power fiber laser applications. This fiber uses a double lattice structure and enables single mode operation with a very large mode area that reaches 1454 µm² when the fiber is kept straight and 655 µm² in the fiber bent around a 10 cm radius. Single mode operation is enforced by the very large bending loss in excess of 50 dB/m...
متن کامل