Optimization of Milk-Based Medium for Efficient Cultivation of Bifidobacterium pseudocatenulatum G4 Using Face-Centered Central Composite-Response Surface Methodology
نویسندگان
چکیده
This study was undertaken to optimize skim milk and yeast extract concentration as a cultivation medium for optimal Bifidobacteria pseudocatenulatum G4 (G4) biomass and β -galactosidase production as well as lactose and free amino nitrogen (FAN) balance after cultivation period. Optimization process in this study involved four steps: screening for significant factors using 2(3) full factorial design, steepest ascent, optimization using FCCD-RSM, and verification. From screening steps, skim milk and yeast extract showed significant influence on the biomass production and, based on the steepest ascent step, middle points of skim milk (6% wt/vol) and yeast extract (1.89% wt/vol) were obtained. A polynomial regression model in FCCD-RSM revealed that both factors were found significant and the strongest influence was given by skim milk concentration. Optimum concentrations of skim milk and yeast extract for maximum biomass G4 and β -galactosidase production meanwhile low in lactose and FAN balance after cultivation period were 5.89% (wt/vol) and 2.31% (wt/vol), respectively. The validation experiments showed that the predicted and experimental values are not significantly different, indicating that the FCCD-RSM model developed is sufficient to describe the cultivation process of G4 using skim-milk-based medium with the addition of yeast extract.
منابع مشابه
Process optimization for ethanol production from very high gravity (VHG) finger millet medium using response surface methodology
The Box-Wilson central composite design (CCD) based on response surface methodology (RSM) was used for ethanol fermentation using very high gravity (VHG) finger millet hydrolysate. Optimized process variables were namely, concentrations of yeast extract, magnesium sulphate and pH of the medium. High gravity mashes (>300 g dissolved solids per liter) were prepared by a thermo-stable α-amylase, f...
متن کاملProduction of L-Asparaginase by Serratia marcescens SB08: Optimization by Response Surface Methodology
This paper describes optimization method that combines the Plackett-Burman design, a factorial design and the response surface method, which were used to optimize the medium for the production of L-asparaginase by Serratia marcescens SB08. Four medium factors, from out of 11 medium factors, were screened by Plackett-Burman design experiments and subsequent optimization process to find out the o...
متن کاملA Multi-Objective Optimization of Artichoke (Cynara Scolymus L.) Leaves Aqueous Extraction Dehydration Through a Novel Spray Drying Approach Using Response Surface Methodology
In this study, Cynara scolymus L. leaves aqueous extract powder was produced using a novel spray drying approach by incorporation of ongoing ultrasonic atomization and vacuumed drying chamber. A Response Surface Methodology (RSM)-based central composite face-centered design was employed for optimization of the operating conditions of the ultrasonic vacuum spray dryer. The independent variab...
متن کاملViability of Bifidobacterium Pseudocatenulatum G4 after spray-Drying and Freeze-Drying
Viability of Bifidobacterium pseudocatenulatum G4 following spray-drying and freeze-drying in skim milk was evaluated. After spray-drying, the strain experienced over 99% loss in viability regardless of the air outlet temperature (75 and 85 °C) and the heat-adaptation temperature (45 and 65 °C, 30 min). The use of heat-adaptation treatment to improve the thermotolerance of this strain was ineff...
متن کاملStudies on optimization of efficient parameters for removal of lead from aqueous solutions by natural zeolite as a low-cost adsorbent using response surface methodology
In this research, the removal of lead from the aqueous solution was investigated using natural nontoxic zeolite (clinoptilolite) as a low-cost adsorbent in order to reduce human exposure to it. The clinoptilolite zeolite obtained from the Semnan area was characterized by X-ray diffraction pattern, FTIR spectroscopy and scanning electron microscopy (SEM). The central composite design (CCD) defin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2014 شماره
صفحات -
تاریخ انتشار 2014