Schottky diodes using as-grown single-walled carbon nanotube ensembles
نویسندگان
چکیده
منابع مشابه
Theoretical and Experimental Studies of Schottky Diodes that Use Aligned Arrays of Single-Walled Carbon Nanotubes
We present theoretical and experimental studies of Schottky diodes that use aligned arrays of single-walled carbon nanotubes. A simple physical model, taking into account the basic physics of current rectification, can adequately describe the single-tube and array devices. We show that for as-grown array diodes, the rectification ratio, defined by the maximum-to-minimum-current-ratio, is low du...
متن کاملCarbon nanotube Schottky diodes using Ti-Schottky and Pt-Ohmic contacts for high frequency applications.
We have demonstrated Schottky diodes using semiconducting single-walled nanotubes (s-SWNTs) with titanium Schottky and platinum Ohmic contacts for high-frequency applications. The diodes are fabricated using angled evaporation of dissimilar metal contacts over an s-SWNT. The devices demonstrate rectifying behavior with large reverse bias breakdown voltages of greater than -15 V. To decrease the...
متن کاملTransport through crossed nanotubes
In order to study the electronic properties of single-walled carbon nanotube junctions we have fabricated several devices consisting of two crossed nanotubes with electrical leads attached to each end of each nanotube. We correlate the properties of the junctions with the properties of the individual nanotubes: metal–metal, metal–semiconductor, and semiconductor– semiconductor junctions are all...
متن کاملModeling of the adsorption kinetics of Basic Red 46 on single-walled carbon nanotube and carboxylate group functionalized single-walled carbon nanotube
The present study was carried out to investigate the potential of single-walled carbon nanotube (SWCNTs) and carboxylate group functionalized single-walled carbon nanotube (SWCNT-COOH) as alternative adsorbents for the removal of Basic Red 46 (BR 46) from contaminated water by using batch adsorption studies. Effects of some key operating parameters such as pH, ionic strength and contact time on...
متن کاملFabrication of nanoelectrodes based on controlled placement of carbon nanotubes using alternating-current electric field
A fabrication process for nanoelectrodes with a nanogap of ;35 nm is presented. This process is based on controlled placement of carbon nanotubes on metal electrodes using an alternating-current ~ac! electric field. One bundle of single-walled nanotubes ~SWNT! was placed successfully between two electrodes using an ac electric field. Electrical measurement of the SWNT bundle through the two met...
متن کامل