Hybrid carbon fiber composite lattice truss structures
نویسنده
چکیده
منابع مشابه
Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact
In this research, the numerical and experimental analysis of the carbon fiber composite lattice conical structure has been performed to assess the buckling stability of the structure before and after the lateral impact. In the experimental analysis, the carbon fiber composite lattice conical structure was constructed with the winding method and using elastic molds and metal mandrel. In or...
متن کاملThree-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining
We present a novel method for fabricating carbon fiber composite sandwich panels with lattice core construction by means of electrical discharge machining (EDM). First, flattop corrugated carbon fiber composite cores were fabricated by a hot press molding method. Then, two composite face sheets were bonded to each corrugated core to create precursor sandwich panels. These panels were transforme...
متن کاملFabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures
A new method for fabricating carbon fiber composite pyramidal truss cores was developed based on the molding hot-press technique. In this method, all the continuous fibers of composite are aligned in the direction of struts and thus, the truss structure can fully exploit the intrinsic strength of the fiber reinforced composite. The microstructure and organizations of fibers of fabricated compos...
متن کاملSandwich-walled cylindrical shells with lightweight metallic lattice truss cores and carbon fiber-reinforced composite face sheets
We manufactured sandwich-walled cylindrical shells with aluminum pyramidal truss core of constant curvature employing an interlocking fabrication technique for the metallic core. The skins were made of carbon-fiber reinforced composites and co-cured with the metallic truss core. Thereafter, we carried out axial compression tests on some representative samples to investigate the failure modes of...
متن کاملInvestigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation
In the current study the effect of nanoclay content and carbon fiber orientation on the buckling properties of epoxy/nanoclay/ carbon fiber orientation is investigated. Buckling samples were prepared with 1, 3 and 5 wt% of nanoclay and 0, 30 and 45 degrees of fiber orientations based on VARTM technique. The results obtained from the buckling tests showed that adding 1wt% of nanoclay into the pu...
متن کامل