Layout to Circuit Extraction for Three-Dimensional Thermal-Electrical Circuit Simulation of Device S - Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on

In this paper, a method is proposed for extraction of coupled networks from layout information for simulation of electrothermal device behavior. The networks represent a threedimensional (3-D) device structure with circuit elements. The electrical and thermal characteristics of this circuit representation are calculated with a circuit simulator. Spatial potential distributions, current flows, and temperature distributions in the device structure are calculated on the spatial coordinates. This simulation method can be placed between device simulation and (conventional) circuit simulation. It has been implemented in a circuit simulator and is demonstrated for simulation of selfheating in a bipolar low frequency power transistor. The main advantage of this simulation method is that not only the 3-D thermal behavior of the whole chip is simulated, but that this is also directly coupled to the electrical device behavior by means of the power dissipation and temperature distribution in the device. This offers the possibility for the circuit designer to simulate 3-D, coupled, thermal-electrical problems with a circuit simulator. As an example, the influence of the emitter contacting on the internal temperature and current distribution of a BJT is investigated.