Counterion effects in cyanine heterojunction photovoltaic devices
نویسنده
چکیده
We investigated cyanine heterojunction photovoltaic devices using carbocyanine dyes as donors and buckminsterfullerene (C60) as acceptor. In particular, we focused on the influence of cyanine counterions on the photovoltaic device characteristics. It was found that counterions can be displaced in the applied electric field and give rise to important hystereses in the current-voltage characteristics, which are related to charge injection processes at electrode and organic heterointerfaces. Mobile counterions have also a drastic effect on the photocurrent spectrum and are responsible for an important C60 contribution at the organic heterojunction between cyanine and C60. If the counterion is covalently linked to the cyanine dye, the C60 contribution in the blue spectral domain can not be observed. C © 2005 Springer Science + Business Media, Inc.
منابع مشابه
On the use of cyanine dyes as low-bandgap materials in bulk heterojunction photovoltaic devices
Cyanine dyes with absorption edges of almost 1000 nm were used in combination with MEH-PPV for the fabrication of organic solar cells. For blended thin films, a pronounced phase separation between the two components occurred and resulted in photocurrents with different signs for bilayer and bulk heterojunction devices. Absorption spectra and selective dissolution experiments were used to illust...
متن کاملSimple Photovoltaic Device Based on Multiwall Carbon Nanotube/Silicon Heterojunction
Multiwall carbon nanotubes (MWCNTs) are grown via chemical vapour deposition method directly on a stainless steel substrate. Raman spectroscopy and transmission electron microscopy are the techniques chosen to characterize the structure of the synthesized carbon nanotubes: few structural defects are detected. After their removal from the stainless steel substrate, the as-grown MWCNTs are then a...
متن کاملSimple Photovoltaic Device Based on Multiwall Carbon Nanotube/Silicon Heterojunction
Multiwall carbon nanotubes (MWCNTs) are grown via chemical vapour deposition method directly on a stainless steel substrate. Raman spectroscopy and transmission electron microscopy are the techniques chosen to characterize the structure of the synthesized carbon nanotubes: few structural defects are detected. After their removal from the stainless steel substrate, the as-grown MWCNTs are then a...
متن کاملPhotoinduced hole-transfer in semiconducting polymer/low-bandgap cyanine dye blends: evidence for unit charge separation quantum yieldw
Power-conversion efficiencies of organic heterojunction solar cells can be increased by using semiconducting donor–acceptor materials with complementary absorption spectra extending to the near-infrared region. Here, we used continuous wave fluorescence and absorption, as well as nanosecond transient absorption spectroscopy to study the initial charge transfer step for blends of a donor poly(p-...
متن کاملArising applications of ferroelectric materials inphotovoltaic devices
Arising applications of ferroelectric materials in photovoltaic devices" The ferroelectric-photovoltaic (FE-PV) device, in which a homogeneous ferroelectric material is used as a light absorbing layer, has been investigated during the past several decades with numerous ferroelectric oxides. The FE-PV effect is distinctly different from the typical photovoltaic (PV) effect in semiconductor p–n j...
متن کامل