Second Simulation of the Satellite Signal in the Solar Spectrum, 6S: an overview

Abstiuct-Remote sensing from satellite or airborne platforms of land or sea surfaces in the visible and near infrared is strongly affected by the presence of the atmosphere along the path from Sun to Target (surface) to Sensor. This paper presents 6s (Second Simulation of the Satellite Signal in the Solar Spectrum), a computer code which can accurately simulate the above problems. The 6S code is an improved version of SS (Simulation of the Satellite Signal in the Solar Spectrum), developed by the Laboratoire d’optique Atmospherique ten years ago. The new version now permits calculations of near-nadir (down-looking) aircraft observations, accounting for target elevation, non lambertian surface conditions, and new absorbing species (CH4, N20, CO). The computational accuracy for Rayleigh and aerosol scattering effects has been improved by the use of state-of-theart approximations and implementation of the successive order of scattering (SOS) algorithm. The step size (resolution) used for spectral integration has been improved to 2.5 nm. The goal of this paper is not to provide a complete description of the methods used as that information is detailed in the 6S manual, but rather to illustrate the impact of the improvements between 5S and 6S by examining some typical remote sensing situations. Nevertheless, the 6S code has still limitations. It cannot handle spherical atmosphere and as a result, it cannot be used for limb observations. In addition, the decoupling we are using for absorption and scattering effects does not allow to use the code in presence of strong absorption bands.