One-dimensional porous nanofibers of Co3O4 on the carbon matrix from human hair with superior lithium ion storage performance
نویسندگان
چکیده
One-dimensional (1D) hierarchical porous nanofibers of Co3O4 possessing of (220) facets on the carbon matrix from human hair (H2@Co3O4) with 20-30 nm in width and 3-5 μm in length are prepared by a facile solvothermal and calcination approach. The well crystallized small Co3O4 particles with the diameter of about 8-12 nm were closely aggregated together in the nanofibers. Electrochemical analyses show that the first discharge capacity of H2@Co3O4 electrode is 1368 mAh g(-1) at the current density of 0.1 A g(-1) based on the total mass of composite. A high reversible capacity of 916 mAh g (-1) was obtained over 100 cycles at 0.1 A g(-1), presenting a good cycling stability. When cycled at a high current density of 1 and 2 A g(-1), the specific capacity of 659 and 573 mAh g(-1) could be still achieved, respectively, indicating a superior power capability.
منابع مشابه
Unique 1D Co3O4 crystallized nanofibers with (220) oriented facets as high-performance lithium ion battery anode material
A novel one-step hydrothermal and calcination strategy was developed to synthesize the unique 1D oriented Co3O4 crystal nanofibers with (220) facets on the carbon matrix derived from the natural, abundant and low cost wool fibers acting as both carbon precursor and template reagent. The resultant W2@Co3O4 nanocomposite exhibited very high specific capacity and favorable high-rate capability whe...
متن کاملCarbon-Encapsulated Co3O4 Nanoparticles as Anode Materials with Super Lithium Storage Performance
A high-performance anode material for lithium storage was successfully synthesized by glucose as carbon source and cobalt nitrate as Co3O4 precursor with the assistance of sodium chloride surface as a template to reduce the carbon sheet thickness. Ultrafine Co3O4 nanoparticles were homogeneously embedded in ultrathin porous graphitic carbon in this material. The carbon sheets, which have large ...
متن کاملFacile Synthesis of Coaxial CNTs/MnOx-Carbon Hybrid Nanofibers and Their Greatly Enhanced Lithium Storage Performance.
Carbon nanotubes (CNTs)/MnOx-Carbon hybrid nanofibers have been successfully synthesized by the combination of a liquid chemical redox reaction (LCRR) and a subsequent carbonization heat treatment. The nanostructures exhibit a unique one-dimensional core/shell architecture, with one-dimensional CNTs encapsulated inside and a MnOx-carbon composite nanoparticle layer on the outside. The particula...
متن کاملRational Design of 1-D Co3O4 Nanofibers@Low content Graphene Composite Anode for High Performance Li-Ion Batteries
Cobalt oxide that has high energy density, is the next-generation candidate as the anode material for LIBs. However, the practical use of Co3O4 as anode material has been hindered by limitations, especially, low electrical conductivity and pulverization from large volume change upon cycling. These features lead to hindrance to its electrochemical properties for lithium-ion batteries. To improve...
متن کاملEgg-Box Structure in Cobalt Alginate: A New Approach to Multifunctional Hierarchical Mesoporous N-Doped Carbon Nanofibers for Efficient Catalysis and Energy Storage
Carbon nanomaterials with both doped heteroatom and porous structure represent a new class of carbon nanostructures for boosting electrochemical application, particularly sustainable electrochemical energy conversion and storage applications. We herein demonstrate a unique large-scale sustainable biomass conversion strategy for the synthesis of earth-abundant multifunctional carbon nanomaterial...
متن کامل