Simultaneous Consideration of Flow and Thermal Effects of Fouling in Crude Oil Preheat Trains
نویسندگان
چکیده
Given models linking flow resistance and fouling resistance it becomes possible to simulate the effects of fouling on the hydraulic performance of a refinery pre-heat train. Such a simulation has been used here to identify when plant throughput will be limited by pressure drop; how throughput can be improved through the cleaning of individual exchangers and groups of exchangers; and how much production can be maintained when individual exchangers are taken off-line. Determination of better operating strategy requires a simulation of both hydraulic and thermal performance. In this paper we implement a pragmatic linked model and consider the results from a set of simulations.
منابع مشابه
Application of Threshold Model with Various Tube Wall Temperatures for Crude Oil Preheat Train Fouling
The Propose of this paper is to introduce a new model for crude oil fouling in preheat trains of crude distillation unit. The experimental results of Australian light crude oil with the tube side surface temperatures between 200-260 oC and fluid velocity ranged 0.25 to 0.4m/s were used. The activation energy of chemical reaction depends on the surface temperature has been calcula...
متن کاملAn Industrial Case Study on Retrofitting Heat Exchangers and Revamping Preheat Trains Subject to Fouling
Crude refinery preheat trains (PHTs) are a major part of a refining process as these units reduce the amount of thermal energy required to heat the crude oil to its distillation temperature. Fouling is a longstanding problem in the operation of PHTs; the ability of a refinery to process different crude blends or to increase its production capacity depends on the thermal and hydraulic performanc...
متن کاملA Review on Crude Oil Fouling and Mitigation Methods in Pre-heat Trains of Iranian Oil Refineries
Crude oil fouling of the equipment surfaces is a troublesome issue which leads to operating difficulties, economic penalties, increased environmental impacts, and health and safety hazards in petroleum industry. With a rough estimation, a minimum cost of equal to 4 million barrels of oil/year is required to be invested to offset the costs of crude oil fouling in Pre-heat Trains of Iranian oil r...
متن کاملEffects of fouling on performance of retrofitted heat exchanger networks: A thermo-hydraulic based analysis
The energy recovery performance of crude pre-heat trains (PHTs) in oil refineries is typically impaired by deposition over time of fouling on the thermal surfaces. Such time varying effects are normally not considered in the design or retrofit of heat exchangers networks. In this paper, the importance of taking into account such effects is demonstrated, bymeans of a case study. An existing indu...
متن کاملFouling of Some Canadian Crude Oils
A thermal fouling study was undertaken using three sour Canadian crude oils. Experiments were carried out in a recirculation fouling loop, equipped with an annular (HTRI) electrically heated probe. Fluids at pressures of about 10001340 kPa under a nitrogen atmosphere were re-circulated at a velocity of 0.75 m/s for periods of 48 hours, and the decline in heat transfer coefficient followed under...
متن کامل