Stain removal from a silicone maxillofacial elastomer.

نویسندگان

  • R Yu
  • A Koran
  • C N Raptis
  • R G Craig
چکیده

In this study, environmental stains were removed from maxillofacial elastomers by solvent extraction. Silastic 44210, an RTV silicone with proven color and physical property stability, was stained with lipstick, disclosing solution, and methylene blue. These stains were then removed by solvent extraction with each of four chemically dissimilar solvents, namely: toluene, benzene, 1,1,1-trichloroethane, and n-hexane. An additional series of samples was prepared with 11 maxillofacial pigments, not for staining, but for evaluation of pigment stability. Results obtained from spectrophotometric measurements before and after solvent extraction demonstrated the effectiveness of solvent extraction in removing stains, while there was little or no change in the color of the pigments or the base elastomer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cigarette staining and cleaning of a maxillofacial silicone.

In this study, a maxillofacial silicone elastomer was stained with cigarette smoke. The stain was then removed by solvent extraction using 1,1,1-trichloroethane. The cigarette smoke produced large color changes in the elastomer as measured from spectrophotometric reflectance curves. The solvent was totally effective in removing the cigarette stain without changing the color of the silicone base.

متن کامل

Effect of tulle on the mechanical properties of a maxillofacial silicone elastomer.

The purpose of this research was to investigate if physical properties could be improved by incorporating a tulle reinforcement material into a maxillofacial silicone elastomer. A-2186 silicone elastomer was used in this study. The study group consisted of 20 elastomer specimens incorporated with tulle and fabricated in dumbbell-shaped silicone patterns using ASTM D412 and D624 standards. The c...

متن کامل

Effect of Surface Treated Silicon Dioxide Nanoparticles on Some Mechanical Properties of Maxillofacial Silicone Elastomer

Current materials used for maxillofacial prostheses are far from ideal and there is a need for novel improved materials which mimic as close as possible the natural behavior of facial soft tissues. This study aimed to evaluate the effect of adding different concentrations of surface treated silicon dioxide nanoparticles (SiO2) on clinically important mechanical properties of a maxillofacial sil...

متن کامل

Effect of vulcanization temperature and dental stone colour on colour degradation of maxillofacial silicone elastomers

BACKGROUND Colour degradation is a major problem in maxillofacial silicone elastomers. Recent studies have focused on colour stability and the mechanical properties of the silicone elastomers. A colour match is also essential for the acceptance of the prosthesis by the patient. The aim of this study is to assess the colour degradation of the silicone elastomer after being moulded in different c...

متن کامل

Development of a 3D printable maxillofacial silicone: Part I. Optimization of polydimethylsiloxane chains and cross-linker concentration.

STATEMENT OF PROBLEM Conventionally, maxillofacial prostheses are fabricated by hand carving the missing anatomic defect in wax and creating a mold into which pigmented silicone elastomer is placed. Digital technologies such as computer numerical control (CNC) milling and 3-dimensional (3D) printing have been used to prepare molds directly or indirectly into which a biocompatible pigmented sili...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of dental research

دوره 60 10  شماره 

صفحات  -

تاریخ انتشار 1981