An Analytical Model for Shot-Peening Induced Residual Stresses
نویسندگان
چکیده
To improve the fatigue life of metallic components, especially in aerospace industry, shot peening is widely used. There is a demand for the advancement of numerical algorithms and methodologies for the estimation of residual stresses due to shot peening. This paper describes an analytical model to simulate the shot peening process and to estimate the residual stress field in the surface layer. In this reasonable, convenient, and simple model, no empirical relation is used, and the effects of shot velocity are included. The results of validation of this model against the test data are very good. keyword: Shot-peening, Residual Stress, Analytical Model
منابع مشابه
Study and Simulation of Shot peening Effect on Fatigue Life of a Powder Forged Connecting rod
Shot peening applies a residual compressive stress field (RCSF) on the surface of parts. It also shifts “crack nucleation sites” to sub-surface locations. A nondestructive method of measuring the stresses, Sin2ψ was utilized here and the stress values introduced to Ansys software. For this purpose, uniform stress in all directions was applied on the con rod. Loading on the rod in Ansys had thre...
متن کاملInfluence of Shot Peening Parameters on Residual Stresses in Flake and Vermicular Cast Irons
Test samples of grey and compacted graphite cast irons with pearlitic matrix were shotpeened to different surface conditions using twelve different combinations of shot size, peening intensity and peening coverage percentage. Relatively high surface compressive residual stresses varying between 245 to 565 MPa were observed and the compressive residual stresses reached a depth between 280 μm and...
متن کاملSurface Layer Analysis after Shot Peening by Barkhausen Noise Signal
In the paper there will be introduced method for relative determination of induced kinetic energy of hardened balls on treated surface, which was invented by J. Alemen. In our experimental work we were focused on measuring Barkhausen noise signals and comparison with microstructure, microhardness, and residual stress analysis of surface roughness. In process of shot peening there is occurrence ...
متن کاملFatigue Life of Repaired Welded Tubular Joints
In this study, the effect of repair on fatigue life of tubular joints is investigated. Six cracked specimens precedently subjected to fatigue loading undergone to weld repair. Two of those specimens were shot peened before primary fatigue loading. It is shown that repair gives rise to about 150% increase in fatigue life for original specimens while the increase of fatigue life for shot-peened ...
متن کاملBasic Aspects of Shot Peening and Conversion of Centrifugal Blast Cleaning Machine to a Peening Machine
Shot Peening process relies on multiple impacts of spherical media to a surface to achieve residual compressive stresses. This results in improved material characteristic.0utofthetwomethodd propeilingshotsforpeeningviz. Airless Shot Peening and Pneumatic Shot Peeningthis papercteals with essentials of centrifugal Blasting Machine and converting a centrifugal Airless Blast Machine to a Shot Peen...
متن کامل