Effects on Composite Thermal Expansion
نویسندگان
چکیده
منابع مشابه
Local Imperfection Effects on Thermal Buckling Behavior of Composite Fiber Reinforced Truncated Conical Liner
Thermal buckling behavior of truncated conical liner reinforced by laminated composite is investigated in the presence of a general initial imperfection. For this purpose, the method of virtual work and first-order strain-deformation shell theory are employed to extract equilibrium equations. To this end, a finite element code is developed using the 3D 8-node shell element with six degrees of f...
متن کاملModelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles
The coefficient of thermal expansion (CTE) is one of the most important physical properties of metal matrix composites (MMCs). The thermal expansion response is correlated to the microstructure, the deformation of the matrix, and the internal stress conditions. In the present study the physical CTE of aluminium matrix composite (AMC) reinforced with 70 vol. % SiC particles is analytically compu...
متن کاملThermal Conductivity and Thermal Expansion Coefficient of Gfrp Composite Laminates with Fillers
This research paper compares the thermal conductivity and thermal expansion coefficients of glass fiber reinforced epoxy composite laminates (GFRP laminates) made using the Hand layup technique. The composite laminates were fabricated by filling with varying concentrations of fly ash, stone powder, aluminium oxide (Al2O3), magnesium hydroxide (Mg (OH)2), Silicon carbide particles(SiC) and hemat...
متن کاملExperimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...
متن کاملPhase-Transformation-Induced Extra Thermal Expansion Behavior of (SrxBa1–x)TiO3/Cu Composite
The properties of metal matrix composites (MMCs) can be optimized effectively through adjusting the type or the volume fraction of reinforcement. Generally, the coefficient of thermal expansion (CTE) of MMCs can be reduced by increasing the volume fraction of the reinforcement with lower CTE than metal matrix. However, it is great challenge to fabricate low CTE MMCs with low reinforcement volum...
متن کامل