Simulation of Effect of Different Values of Operating Variables in a Continuous Pan
نویسنده
چکیده
Growth rate parameter, mmlh. Supersaturationof the mother liquor (Saturation = 1,00) Retention ti.me in a compartment (hrs), which is directly proportional to the compartment volume and inversely proportional to the massecuite rate through it. Effect of impurity/water ratio, according to a function evaluated by Wrightexp (-1,75 * (Impurity/water ratio» An asterisk (*) will be used for a multiplication sign.
منابع مشابه
Design and operation optimization of an air conditioning system through simulation: an hour-by-hour simulation study
In the present research, performance validation of a Heating, Ventilation, and Air Conditioning (HVAC) system operating in a library building was conducted. The operating HVAC system was studied in terms of the provided indoor air conditions and energy consumption level. The fieldwork measurements showed that the HVAC system is not capable of providing the desired indoor air conditions based on...
متن کاملProgram for · Simulating and Evaluating a Continuous a - Sugar Pan
The Continuously Operating Raw Pan Simulation and Evaluation (CORPSE) is a steady-state computerised simulation of such a pan, based on the solution by the Newton-Raphson method of simultaneous algebraic equations which describe the mass and heat transfer within and the material balances over each compartment. Each compartment is considered as a stirred tank reactor, with unknown components bei...
متن کاملMethylene blue removal from aqueous solutions by electrocoagulation in continuous flow reactor: Modeling and optimization of operating parameters
Introduction The application and increasingly produce of colorants, particularly, synthetic dyes, are one of the main environmental and health concerns especially in industrialized countries. If this type of dyes is discharged into the environment without any control, many problems will arise. Therefore, it is necessary to remove the dyes from aqueous solutions using appropriate methods. The p...
متن کاملSimulation of Temperature Distribution in a Continuous Tunnel Reheat Furnace Using the Monte Carlo Method
A mathematical model of a continuous reheating furnace has been developed to identify the design and operating parameters that significantly affect furnace performance. In this study, the furnace is modeled 3 dimensionally and theMonte Carlomethod is used to find the overall absorption factor. The overall absorption factor is then used to calculate the energy balance for furnace walls, the gas,...
متن کاملMathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet
The method of continuous casting of steel is now often used in the metallurgical industry, due to the increasing demand for the production of high – quality steel. An important device of continuous casting machine is the tundish, in which a stabilized steel flow has a crucial effect on the quality and efficiency conditions of the continuous casting process. In this study fluid flows in a six – ...
متن کامل